5 Steps to Repair Single-Ply Roofing Punctures With Hot Air Tools
It is not uncommon for storms, debris or man-made objects to puncture or tear a single-ply sheet, which if not immediately addressed can lead to water damage and other issues. Fortunately, with the right tools and technique, this damage can be quickly remedied by hot-air welding a patch over the hole or rip.- Robert Heater
- Tags: Automatic welder IHS Plastic welding Steinel welding
Hot Air Tool Troubleshooting: Weak Heat Output
If your hot-air tool isn’t reaching the proper temperature, or doesn’t get as hot as it once did, you may have a faulty heating element.
- Robert Heater
- Tags: Hot air hand tool Hot air tool Nozzle Plastic welding
Round Up: Our Most-Recommended Roofing Tools
Are you reconsidering your current equipment lineup? If you're preparing to upgrade your systems and tools, IHS has your solution. Keep reading for a roundup of our favorite roofing systems, parts, and accessories.- Robert Heater
- Tags: Forsthoff IHS Miller Weldmaster Plastic welding Roofing Steinel welding
How to Weld With a Hot Air Hand Tool
In roofing, you'll often be required to perform an overlap weld to join two pieces of thermoplastic (i.e. TPO, PVC, PPE), or plastic-coated fabrics. We've outlined the steps to seam welding with a hot-air hand tool.- Robert Heater
- Tags: Hot air hand tool Hot air tool Plastic welding Thermoplastic Welding
11 Single-Ply Roofing Tools Contractors Need
Over the past 35 years, single-ply thermoplastic membranes-such as TPO and PVC-have grown in popularity as an effective alternative to asphalt-based commercial and industrial roofing systems. This shift is largely due to single-ply's ease of installation, relatively low cost, durability, and its energy-cost saving potential.
However, a singly-ply roofing system is only as good as its seam welds. To consistently create durable, watertight seams that can withstand heavy weathering (i.e. wind, rain, snow, standing water and sun), you'll need to invest in the right equipment.
- Robert Heater
- Tags: IHS Plastic welding Roofing Steinel Thermoplastic welding
6 Ways to Keep a Hot-Air Plastic Welder in Peak Condition
Proper use and maintenance can keep your hot-air plastic welder in peak operating condition. Prevent downtime, maintain maximum performance and extend your tool’s life expectancy with these 6 preventative maintenance tips.
- Robert Heater
- Tags: Air filter IHS Plastic welder Plastic welding welding
9 Plastic Welding Safety Tips
The tools of any trade can pose safety risks if improperly used or maintained. To keep operators of hot-air hand tools and automatic walk welders safe, it is the responsibility of employers, supervisors and peers, to make sure proper precautions are routinely taken.- Robert Heater
- Tags: Hot air hand tool Hot air tool Plastic welding welding
Hot-Air Tool Techniques: Single-Ply Welding on Vertical Surfaces
Parapets are wall-like barriers surrounding the edge of a flat roof, as seen on many commercial buildings. These half-walls serve many purposes. Unfortunately, these architectural features can prove challenging for contractors charged with seam welding a single-ply, thermoplastic membrane along the parapet’s vertical surface.- Robert Heater
- Tags: Hand welder Hot air hand tool Plastic welding Semi-automatic hand welder welding