{"id":6696389509197,"title":"Tempco Tubular Band Heaters","handle":"tempco-tubular-band-heaters","description":"\u003cp data-mce-fragment=\"1\"\u003eTubular Nozzle Band heaters are recommended for heating applications where premature nozzle band heater burn-out on plastic injection molding machines is a constant problem due to contamination from plastic overflow or contaminants.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncoloy® 840 sheath .315 diameter tubular heating element is used as the heat source. It is formed to the specified inside diameter to produce a snug, slip-on fit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA low thermal expansion alloy is used to make the strap that houses the tubular heating element. The strap edges are rolled over the element to prevent the strap from separating from the tubular heater. Specially designed mounting brackets provide the clamping force required to tightly draw the tubular heater against the cylinder.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003e\u003cem\u003ePerformance Ratings\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Temperature:\u003c\/strong\u003e 1000°F (540°C)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Watt Density: \u003c\/strong\u003e4\u003c\/em\u003e\u003cem\u003e0 W\/in2 (7.0 W\/cm\u003csup\u003e2\u003c\/sup\u003e)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eElectrical Ratings\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Voltage: \u003c\/strong\u003e277V\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Amperage: \u003c\/strong\u003e30 Amps\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eResistance Tolerance:\u003c\/strong\u003e +10%, –5%\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWattage Tolerance:\u003c\/strong\u003e +5%, –10%\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCaution: Do not make a sharp bend.  This can crack the heating element.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eMechanical\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMinimum Width: \u003c\/strong\u003e1-1\/2\" (38.1 mm)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMinimum Inside Diameter: \u003c\/strong\u003e1-1\/2\" (38.1 mm)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard Gap: \u003c\/strong\u003e3\/8\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eHoles: \u003c\/strong\u003eCan be accommodated.  Contact  us (844) 862-7880 with your requirements.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eDesign Features:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cem\u003eSheath Materials\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIncoloy 840\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eNickel 18-20%, Chromium 18-22%, Iron balance.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eThe Incoloy 840 has 10% less nickel than Incoloy 800. It is used in many air heating applications, where it has exhibited superior oxidation resistance at less cost than Incoloy 800.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCaution: \u003cspan data-mce-fragment=\"1\"\u003eMaximum Sheath Temperature refers to the maximum temperature of the element sheath material.  Consideration must be given to the maximum temperature that can be safely applied to the heated material.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-78 for additional specifications and features.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for Watt Density information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eElectrical Terminations\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C3: Single Armor Cable Out Top\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 164px;\"\u003e\n\u003ctd style=\"text-align: center; height: 164px;\"\u003e \u003cimg alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF014.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF014.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF014.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 31.7812px;\"\u003e\n\u003ctd style=\"height: 31.7812px;\"\u003e\n\u003cp\u003e\u003cem\u003eArmor Cable provides excellent protection against abrasion and contaminants. The cable exits through an adapter that encapsulates both tubular heater ends. The adapter tube is tack welded to the heating element and the cable is crimped to the adapter for maximum security and seal protection. for maximum security and seal protection. 20\" of cable and 24\" flexible leads are standard.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C3A – \u003c\/strong\u003eGalvanized Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C3B – \u003c\/strong\u003eStainless Steel Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOptions: \u003c\/strong\u003eMale or female plugs attached to leads.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType W3: Wire Braid Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"193\" width=\"193\" alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF017.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF017.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF017.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eWire Braid provides strength and protection to the lead wire insulation, offering sharp bending not possible with armor cable. 20\" of wire braid and 24\" flexible leads are standard.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOptions:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eLonger leads or braid\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eMale or female plugs attached to leads.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cb\u003e\u003ci\u003e\u003cbr\u003e\u003c\/i\u003e\u003c\/b\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType T1: Screw Terminals\u003c\/h4\u003e\n\u003ctable style=\"width: 100.409%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 100%;\"\u003e\n\u003cimg alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF018.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF018.jpg?Small\" width=\"163\" height=\"163\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF018.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\n\u003cp\u003e\u003cem\u003eScrew Terminals will provide a rigid connection when it is required. Standard thread size is 8-32. If another type is required, specify when ordering. You should make special arrangements to properly insulate the electrical connections.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C1: Single Armor Cable\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 157.156px;\"\u003e\n\u003ctd style=\"text-align: center; height: 157.156px;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF019.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF019.jpg\" width=\"163\" height=\"163\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF019.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 157.156px;\"\u003e\n\u003ctd style=\"height: 157.156px; text-align: left;\"\u003e\n\u003cp\u003e\u003cem\u003eArmor Cable provides excellent protection against abrasion and contaminants. The cable exits through an adapter that encapsulates both tubular heater ends. The adapter tube is tack welded to the heating element and the cable is crimped to the adapter for maximum security and seal protection. 20\" of cable and 24\" flexible leads are standard.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C1A – \u003c\/strong\u003eGalvanized Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C1B – \u003c\/strong\u003eStainless Steel Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e Male or female plugs attached to leads.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C2: Individual Armor Cable\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF016.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF016.jpg\" width=\"163\" height=\"163\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF016.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eArmor Cable provides excellent protection against abrasion and contaminants. The cable is securely fastened individually to the tubular heater ends, allowing more flexibility for electrical wiring connections. 20\" of cable and 24\" flexible leads are standard.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C2A – \u003c\/strong\u003eGalvanized Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C2B\u003c\/strong\u003e – Stainless Steel Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCommon Applications:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003cdiv class=\"Float33 Freeform New100 CenterZone TitanBlock StripeGrey Float firstItemInRow\" blockinfo=\"Float33 Freeform New100 CenterZone TitanBlock\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eAutoclaves \u0026amp; Sterilizers\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eBlow Molding Machines (Barrels \u0026amp; Heads)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eBlown Film Dies\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDrum Heating\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eExtrusion Die\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFluidized Beds\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFood \u0026amp; Candy Extruders\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFood Service Warming Pots\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Float33 Freeform New50 CenterZone TitanBlock StripeGrey Float firstItemInRow\" blockinfo=\"Float33 Freeform New50 CenterZone TitanBlock\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eHolding Tanks\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eHot Runner Molding Bushings\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eMetallurgical Analyzation Equipment\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eOil Reclamation Systems\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003ePlastic Extruders\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003ePlastic Injection Molding Machines\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003ePulp \u0026amp; Paper Processing Equipment\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eVending Machines\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2021-11-04T14:27:43-04:00","created_at":"2021-11-03T12:00:57-04:00","vendor":"Tempco","type":"Replacement Parts","tags":["Electronics","Food \u0026 Beverage","Heaters","Manufacturing","Medical \u0026 Pharmaceutical Production","Plastic Fabrication","Process Heat","Replacement Parts","Tempco"],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39533096042573,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TNB01001","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Tempco Tubular Band Heaters","public_title":null,"options":["Default Title"],"price":0,"weight":2268,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters.png?v=1635955260","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters-1.png?v=1635955260","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters-2.png?v=1635955260"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters.png?v=1635955260","options":["Title"],"media":[{"alt":null,"id":21159048249421,"position":1,"preview_image":{"aspect_ratio":1.423,"height":459,"width":653,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters.png?v=1635955260"},"aspect_ratio":1.423,"height":459,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters.png?v=1635955260","width":653},{"alt":null,"id":21159048282189,"position":2,"preview_image":{"aspect_ratio":0.838,"height":831,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters-1.png?v=1635955260"},"aspect_ratio":0.838,"height":831,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters-1.png?v=1635955260","width":696},{"alt":null,"id":21159048314957,"position":3,"preview_image":{"aspect_ratio":0.839,"height":831,"width":697,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters-2.png?v=1635955260"},"aspect_ratio":0.839,"height":831,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoTubularBandHeaters-2.png?v=1635955260","width":697}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eTubular Nozzle Band heaters are recommended for heating applications where premature nozzle band heater burn-out on plastic injection molding machines is a constant problem due to contamination from plastic overflow or contaminants.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncoloy® 840 sheath .315 diameter tubular heating element is used as the heat source. It is formed to the specified inside diameter to produce a snug, slip-on fit.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA low thermal expansion alloy is used to make the strap that houses the tubular heating element. The strap edges are rolled over the element to prevent the strap from separating from the tubular heater. Specially designed mounting brackets provide the clamping force required to tightly draw the tubular heater against the cylinder.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003e\u003cem\u003ePerformance Ratings\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Temperature:\u003c\/strong\u003e 1000°F (540°C)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Watt Density: \u003c\/strong\u003e4\u003c\/em\u003e\u003cem\u003e0 W\/in2 (7.0 W\/cm\u003csup\u003e2\u003c\/sup\u003e)\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eElectrical Ratings\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Voltage: \u003c\/strong\u003e277V\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Amperage: \u003c\/strong\u003e30 Amps\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eResistance Tolerance:\u003c\/strong\u003e +10%, –5%\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWattage Tolerance:\u003c\/strong\u003e +5%, –10%\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCaution: Do not make a sharp bend.  This can crack the heating element.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eMechanical\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMinimum Width: \u003c\/strong\u003e1-1\/2\" (38.1 mm)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMinimum Inside Diameter: \u003c\/strong\u003e1-1\/2\" (38.1 mm)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eStandard Gap: \u003c\/strong\u003e3\/8\"\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eHoles: \u003c\/strong\u003eCan be accommodated.  Contact  us (844) 862-7880 with your requirements.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eDesign Features:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cem\u003eSheath Materials\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIncoloy 840\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eNickel 18-20%, Chromium 18-22%, Iron balance.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eThe Incoloy 840 has 10% less nickel than Incoloy 800. It is used in many air heating applications, where it has exhibited superior oxidation resistance at less cost than Incoloy 800.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCaution: \u003cspan data-mce-fragment=\"1\"\u003eMaximum Sheath Temperature refers to the maximum temperature of the element sheath material.  Consideration must be given to the maximum temperature that can be safely applied to the heated material.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-78 for additional specifications and features.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for Watt Density information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eElectrical Terminations\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C3: Single Armor Cable Out Top\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 164px;\"\u003e\n\u003ctd style=\"text-align: center; height: 164px;\"\u003e \u003cimg alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF014.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF014.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF014.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 31.7812px;\"\u003e\n\u003ctd style=\"height: 31.7812px;\"\u003e\n\u003cp\u003e\u003cem\u003eArmor Cable provides excellent protection against abrasion and contaminants. The cable exits through an adapter that encapsulates both tubular heater ends. The adapter tube is tack welded to the heating element and the cable is crimped to the adapter for maximum security and seal protection. for maximum security and seal protection. 20\" of cable and 24\" flexible leads are standard.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C3A – \u003c\/strong\u003eGalvanized Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C3B – \u003c\/strong\u003eStainless Steel Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOptions: \u003c\/strong\u003eMale or female plugs attached to leads.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType W3: Wire Braid Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"193\" width=\"193\" alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF017.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF017.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF017.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eWire Braid provides strength and protection to the lead wire insulation, offering sharp bending not possible with armor cable. 20\" of wire braid and 24\" flexible leads are standard.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOptions:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eLonger leads or braid\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eMale or female plugs attached to leads.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cb\u003e\u003ci\u003e\u003cbr\u003e\u003c\/i\u003e\u003c\/b\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType T1: Screw Terminals\u003c\/h4\u003e\n\u003ctable style=\"width: 100.409%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 100%;\"\u003e\n\u003cimg alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF018.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF018.jpg?Small\" width=\"163\" height=\"163\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF018.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\n\u003cp\u003e\u003cem\u003eScrew Terminals will provide a rigid connection when it is required. Standard thread size is 8-32. If another type is required, specify when ordering. You should make special arrangements to properly insulate the electrical connections.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C1: Single Armor Cable\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 157.156px;\"\u003e\n\u003ctd style=\"text-align: center; height: 157.156px;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF019.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF019.jpg\" width=\"163\" height=\"163\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF019.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 157.156px;\"\u003e\n\u003ctd style=\"height: 157.156px; text-align: left;\"\u003e\n\u003cp\u003e\u003cem\u003eArmor Cable provides excellent protection against abrasion and contaminants. The cable exits through an adapter that encapsulates both tubular heater ends. The adapter tube is tack welded to the heating element and the cable is crimped to the adapter for maximum security and seal protection. 20\" of cable and 24\" flexible leads are standard.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C1A – \u003c\/strong\u003eGalvanized Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C1B – \u003c\/strong\u003eStainless Steel Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eOptions:\u003c\/strong\u003e Male or female plugs attached to leads.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C2: Individual Armor Cable\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF016.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/01-Band-Images\/WebF016.jpg\" width=\"163\" height=\"163\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/01-Band-Images\/WebF016.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eArmor Cable provides excellent protection against abrasion and contaminants. The cable is securely fastened individually to the tubular heater ends, allowing more flexibility for electrical wiring connections. 20\" of cable and 24\" flexible leads are standard.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C2A – \u003c\/strong\u003eGalvanized Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eType C2B\u003c\/strong\u003e – Stainless Steel Armor Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan data-mce-fragment=\"1\"\u003eSee reference page 1-79 for additional specifications and ordering information.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCommon Applications:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003cdiv class=\"Float33 Freeform New100 CenterZone TitanBlock StripeGrey Float firstItemInRow\" blockinfo=\"Float33 Freeform New100 CenterZone TitanBlock\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eAutoclaves \u0026amp; Sterilizers\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eBlow Molding Machines (Barrels \u0026amp; Heads)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eBlown Film Dies\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDrum Heating\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eExtrusion Die\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFluidized Beds\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFood \u0026amp; Candy Extruders\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFood Service Warming Pots\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"Float33 Freeform New50 CenterZone TitanBlock StripeGrey Float firstItemInRow\" blockinfo=\"Float33 Freeform New50 CenterZone TitanBlock\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eHolding Tanks\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eHot Runner Molding Bushings\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eMetallurgical Analyzation Equipment\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eOil Reclamation Systems\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003ePlastic Extruders\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003ePlastic Injection Molding Machines\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003ePulp \u0026amp; Paper Processing Equipment\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eVending Machines\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}

Tempco Tubular Band Heaters

Product Description

Tubular Nozzle Band heaters are recommended for heating applications where premature nozzle band heater burn-out on plastic injection molding machines is a constant problem due to contamination from plastic overflow or contaminants.

Incoloy® 840 sheath .315 diameter tubular heating element is used as the heat source. It is formed to the specified inside diameter to produce a snug, slip-on fit.

A low thermal expansion alloy is used to make the strap that houses the tubular heating element. The strap edges are rolled over the element to prevent the strap from separating from the tubular heater. Specially designed mounting brackets provide the clamping force required to tightly draw the tubular heater against the cylinder.

Specifications:

Performance Ratings

Maximum Temperature: 1000°F (540°C)

Maximum Watt Density: 40 W/in2 (7.0 W/cm2)

Electrical Ratings

Maximum Voltage: 277V

Maximum Amperage: 30 Amps

Resistance Tolerance: +10%, –5%

Wattage Tolerance: +5%, –10%

Caution: Do not make a sharp bend.  This can crack the heating element.

Mechanical

Minimum Width: 1-1/2" (38.1 mm)

Minimum Inside Diameter: 1-1/2" (38.1 mm)

Standard Gap: 3/8"

Holes: Can be accommodated.  Contact  us (844) 862-7880 with your requirements.

Design Features:

Sheath Materials

Incoloy 840

  • Nickel 18-20%, Chromium 18-22%, Iron balance.
  • The Incoloy 840 has 10% less nickel than Incoloy 800. It is used in many air heating applications, where it has exhibited superior oxidation resistance at less cost than Incoloy 800.

Caution: Maximum Sheath Temperature refers to the maximum temperature of the element sheath material.  Consideration must be given to the maximum temperature that can be safely applied to the heated material.

  • See reference page 1-78 for additional specifications and features.
  • See reference page 1-79 for Watt Density information.

Electrical Terminations

Type C3: Single Armor Cable Out Top

 /Tempco/Data-Assets/01-Band-Images/WebF014.jpg

Armor Cable provides excellent protection against abrasion and contaminants. The cable exits through an adapter that encapsulates both tubular heater ends. The adapter tube is tack welded to the heating element and the cable is crimped to the adapter for maximum security and seal protection. for maximum security and seal protection. 20" of cable and 24" flexible leads are standard.

  • Type C3A – Galvanized Armor Cable
  • Type C3B – Stainless Steel Armor Cable

Options: Male or female plugs attached to leads.

  • See reference page 1-79 for additional specifications and ordering information.


Type W3: Wire Braid Leads

 /Tempco/Data-Assets/01-Band-Images/WebF017.jpg

Wire Braid provides strength and protection to the lead wire insulation, offering sharp bending not possible with armor cable. 20" of wire braid and 24" flexible leads are standard.

Options:

  • Longer leads or braid
  • Male or female plugs attached to leads.
  • See reference page 1-79 for additional specifications and ordering information.

Type T1: Screw Terminals

/Tempco/Data-Assets/01-Band-Images/WebF018.jpg 

Screw Terminals will provide a rigid connection when it is required. Standard thread size is 8-32. If another type is required, specify when ordering. You should make special arrangements to properly insulate the electrical connections.

  • See reference page 1-79 for additional specifications and ordering information.

Type C1: Single Armor Cable

 /Tempco/Data-Assets/01-Band-Images/WebF019.jpg

Armor Cable provides excellent protection against abrasion and contaminants. The cable exits through an adapter that encapsulates both tubular heater ends. The adapter tube is tack welded to the heating element and the cable is crimped to the adapter for maximum security and seal protection. 20" of cable and 24" flexible leads are standard.

  • Type C1A – Galvanized Armor Cable
  • Type C1B – Stainless Steel Armor Cable

Options: Male or female plugs attached to leads.

  • See reference page 1-79 for additional specifications and ordering information.

Type C2: Individual Armor Cable

 /Tempco/Data-Assets/01-Band-Images/WebF016.jpg

Armor Cable provides excellent protection against abrasion and contaminants. The cable is securely fastened individually to the tubular heater ends, allowing more flexibility for electrical wiring connections. 20" of cable and 24" flexible leads are standard.

  • Type C2A – Galvanized Armor Cable
  • Type C2B – Stainless Steel Armor Cable
  • See reference page 1-79 for additional specifications and ordering information.

Common Applications:

  • Autoclaves & Sterilizers
  • Blow Molding Machines (Barrels & Heads)
  • Blown Film Dies
  • Drum Heating
  • Extrusion Die
  • Fluidized Beds
  • Food & Candy Extruders
  • Food Service Warming Pots
  • Holding Tanks
  • Hot Runner Molding Bushings
  • Metallurgical Analyzation Equipment
  • Oil Reclamation Systems
  • Plastic Extruders
  • Plastic Injection Molding Machines
  • Pulp & Paper Processing Equipment
  • Vending Machines
Sku: TNB01001
Vendor: Tempco
Call for Product Support & Pricing
Maximum quantity available reached.

Related products