{"id":6697535144013,"title":"Tempco Hi-Density Cartridge Heaters","handle":"tempco-hi-density-cartridge-heaters","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eStandard sheath material is 321 Stainless Steel which provides good thermal conductivity, and resistance to corrosion and scaling. Welded end disc made from the same material as the sheath provides a positive seal against moisture and other contaminants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eGrade “A” Nickel-Chrome resistance wire precisely wound on a high purity magnesium oxide core places the resistance wire as close to the inside of the sheath as possible. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eA high purity Magnesium Oxide (MgO) powder is used to fill all remaining space inside the sheath. Heater is then swaged, which compacts the magnesium oxide grains into a solid mass. The standard termination for is Type N, 10\" (254 mm) long nickel conductor lead wires externally connected to solid conductor terminal pins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003e\u003cem\u003ePerformance Ratings\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Temperature:\u003c\/strong\u003e 1400°F (760°C)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Watt Density:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e100-300\u003c\/em\u003e\u003cem\u003e W\/in2 (15.5-46.5 W\/cm\u003csup\u003e2\u003c\/sup\u003e); Depending on heater size and operating temperature.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e The maximum operating temperature and the life expectancy of a cartridge heater is dependent on two main factors.\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003eThe maximum recommended sheath temperature (* 1200°F for a standard heater).\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eThe maximum ambient temperature for the termination selected.  Call us (844) 862-7880 if you require a recommendation for your application.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cem\u003eElectrical Ratings\u003c\/em\u003e\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Diameter\u003c\/th\u003e\n\u003cth\u003e1\/4\"\u003c\/th\u003e\n\u003cth\u003e5\/16\"\u003c\/th\u003e\n\u003cth\u003e3\/8\"\u003c\/th\u003e\n\u003cth\u003e1\/2\"\u003c\/th\u003e\n\u003cth\u003e5\/8\"\u003c\/th\u003e\n\u003cth\u003e3\/4\"\u003c\/th\u003e\n\u003cth\u003e1\"\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eMaximum Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e240\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e240\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e240\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e240\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e480*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e480*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e480*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Amperage (see next line for exceptions)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.4\u003c\/td\u003e\n\u003ctd\u003e4.5\u003c\/td\u003e\n\u003ctd\u003e6.7\u003c\/td\u003e\n\u003ctd\u003e10.5\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003e†Maximum Amperage for Types C1C, C1D, C2C, C2D, CS, F, M3, R1B, S1, S2, SA, W \u0026amp; W3 Terminations\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003ctd\u003e7.6\u003c\/td\u003e\n\u003ctd\u003e9.7\u003c\/td\u003e\n\u003ctd\u003e9.7\u003c\/td\u003e\n\u003ctd\u003e9.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Wattage at 120V on a 1\" long Heater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Wattage at 120V on a 2\" long Heater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Wattage at 120V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e525\u003c\/td\u003e\n\u003ctd\u003e540\u003c\/td\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003ctd\u003e1260\u003c\/td\u003e\n\u003ctd\u003e2760\u003c\/td\u003e\n\u003ctd\u003e2760\u003c\/td\u003e\n\u003ctd\u003e2760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Wattage at 240V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1050\u003c\/td\u003e\n\u003ctd\u003e1080\u003c\/td\u003e\n\u003ctd\u003e1600\u003c\/td\u003e\n\u003ctd\u003e2520\u003c\/td\u003e\n\u003ctd\u003e5520\u003c\/td\u003e\n\u003ctd\u003e5520\u003c\/td\u003e\n\u003ctd\u003e5520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Wattage at 480V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e11,000\u003c\/td\u003e\n\u003ctd\u003e11,000\u003c\/td\u003e\n\u003ctd\u003e11,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eWattage Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"7\"\u003ePlus 5%, Minus 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eResistance Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" colspan=\"7\"\u003ePlus 10%, Minus 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eDimensional Specifications\u003c\/em\u003e\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Diameter\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e1\/4\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e5\/16\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e3\/8\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e1\/2\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e5\/8\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e3\/4\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e1\"\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eActual Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.246\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-6.25\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.308\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-7.82\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.371\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-9.42\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.496\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-12.6\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.621\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-15.77\u003c\/td\u003e\n\u003ctd\u003e0.746\u003c\/td\u003e\n\u003ctd\u003e-18.95\u003c\/td\u003e\n\u003ctd\u003e0.996\u003c\/td\u003e\n\u003ctd\u003e-25.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd\u003e±.003\u003c\/td\u003e\n\u003ctd\u003e-0.076\u003c\/td\u003e\n\u003ctd\u003e±.003\u003c\/td\u003e\n\u003ctd\u003e-0.076\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eMinimum Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd\u003e1\/1\/04\u003c\/td\u003e\n\u003ctd\u003e-31.75\u003c\/td\u003e\n\u003ctd\u003e1\/3\/04\u003c\/td\u003e\n\u003ctd\u003e-44.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eMaximum Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e36\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-914\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e36\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-914\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e48\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-1219\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e60\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-1524\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e72\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-1829\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003ctd\u003e-1829\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003ctd\u003e-1829\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" style=\"text-align: center;\"\u003e\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd\u003e±1\/8\u003c\/td\u003e\n\u003ctd\u003e(3.2)\u003c\/td\u003e\n\u003ctd\u003e±1\/8\u003c\/td\u003e\n\u003ctd\u003e(3.2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"14\" style=\"text-align: center;\"\u003eHeaters up to 5\" (127 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\" colspan=\"14\" style=\"text-align: center;\"\u003e±2% of Sheath Length Heaters over 5\" (127 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eCamber Tolerance Heaters up to 12\" (305 mm) long\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd align=\"center\" colspan=\"14\"\u003e0.010\"(.254 mm) per foot of length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eCamber Tolerance Heaters over 12\" (305 mm) long\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd align=\"center\" colspan=\"14\"\u003e0.020\"(.508 mm) per foot of length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eLength Tolerance\u003c\/em\u003e\u003c\/h4\u003e\n\u003ch4\u003e–\u003cem\u003e Lead Wires\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e– Wire Braid Leads\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e– Armor Cable Leads\u003c\/em\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eUp to 36\":\u003c\/strong\u003e -1\/2\", +1\" (-12.7 mm, +25.4 mm)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003e36\" to 72\":\u003c\/strong\u003e -1\", +2\" (25.4 mm, +50.8 mm)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eAbove 72\":\u003c\/strong\u003e ±4\" (101.6 mm)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote: \u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003eSpecifications detailed on this page are standard. Contact us (844) 862-7880 if your application requires tighter tolerances or has other special requirements.\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eTemperature Coefficient of Resistance\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003eThe electrical resistance (ohms) of the heater resistance wire increases with temperature rise.  \u003c\/span\u003e\u003cspan\u003eTempco standard Hi-Density Cartridge Heaters are manufactured with ohms (cold ohms) 3.3% lower than the actual calculated ohms (hot ohms) to compensate for this increase.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eAvailable Electrical Features\u003c\/em\u003e\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: center;\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eDual Volts\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003e3-Phase\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eDual  Circuits\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eMultiple Heat Zones\u003cbr\u003e(maximum 3 zones)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eContact us (844) 862-7880 for maximum wattages and voltages.  \u003c\/em\u003e\u003cem\u003e* Heaters may require a larger diameter transition area at lead end.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eDesign Features:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2, 2-8, and 2-9 for Cartridge Heater Standard and Custom Features and Ordering information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-3 for Hi-Density Cartridge Heater category classification (Multi-Purpose Use - Highly Engineered Specific Purpose Usage) and ordering information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-4 for detailed performance and electrical specification information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-5 for detailed Watt Density specifications.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-6 for heater fitting and preventative contamination measures.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-6 for heater temperature control methods and excessive lead flexing preventative measures.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-7 for preventing excessive operating temperatures, and BNS Anti-Seize preventative measures.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-14 thru 2-23 for cartridge heater ordering information. \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTerminator Program\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eA select amount of heater specifications are available in our expedited shipping Terminator Program. Choose you\u003c\/em\u003er \u003cem\u003edesired shipping window and browse available selections below.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"177\" width=\"153\" alt=\"\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebTerminatorComboRev12-10.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebTerminatorComboRev12-10.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThese heaters are semi-finished (substrates), offering you the option to finish them by choosing from 19 program-qualified lead end terminations and options on select cartridge heater diameters. Cartridge heaters will be ready for shipment within 1 to 3 days, depending on the termination\/option selected.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eOrdering Information — Follow These Simple Steps\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cem\u003e1. Select a diameter available in the Terminator Program or refer to the Preconfigured Cartridge Heater Part Numbers:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e1\/4\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e5\/16\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e3\/8\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e1\/2\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e5\/8\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e3\/4\"\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e2. Chose a Program qualified Electrical Termination (required), Termination Option (optional) and Power Variation (optional).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e3. Specify your lead requirements in the event that the standard supplied lengths for Plain Leads (10\"), Braid or Armor Cable (10\" over 12\" leads) are not suited for your application.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e4. Submit your order to us to place an order, or contact us at (844) 862-7880!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch6 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h6\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eTermination Location\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSingle-Ended Straight Termination\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003e \u003cimg height=\"164\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg?Small\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eThe Electrical Termination is located at one end of the heater and exits straight out from the heater.\u003c\/em\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSingle-Ended Right-Angle Termination\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 179px;\"\u003e\n\u003ctd style=\"text-align: center; height: 179px;\"\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC007.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC007.jpg\" width=\"223\" height=\"164\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18.1406px;\"\u003e\n\u003ctd style=\"height: 18.1406px;\"\u003e\u003cem\u003eThe Electrical Termination is located at one end of the heater and exits at a right angle from the heater.\u003c\/em\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eDouble-Ended Termination\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC017.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC017.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC017.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eEach end has one Electrical Termination.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eNot Available on 1\/8\" Cartridge Heaters.\u003c\/span\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eRequest Other Termination Location\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eIf your filter selections do not return your desired results from our standard configurations, please continue to select your Specifications.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWhen you are finished, save your selections in the Wish List (using the button at the right of this page) and follow the steps to submit them to Industrial Heat Sources!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong data-mce-fragment=\"1\"\u003eElectrical Terminations\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType N: External Pins with Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 133px;\"\u003e\n\u003ctd style=\"text-align: center; height: 133px;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5156px;\"\u003e\n\u003ctd style=\"height: 19.5156px;\"\u003e\n\u003cp\u003e\u003cem\u003eStandard Termination for \u003cstrong\u003eHi-Density and Hi-Density Metric Cartridge Heaters\u003c\/strong\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFlexible stranded lead wires have fiberglass insulation and are connected to 1-1\/4\" (32 mm) long solid conductors. Silicone rubber coated fiberglass sleeving insulates the pin\/lead wire connection.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eNominal 3\/8\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-12 and 2-39 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType F: Internally Connected Flexible Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC002.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC002.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC002.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStandard Termination for \u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe fiberglass lead wires are internally connected to the terminal pins. This lead termination provides flexibility, permitting the lead wires to be sharply bent as they exit the heater.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating for HDC \u0026amp; HDM: 842°F (450°C).\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating for LDC: 482°F (250°C).\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eFor HDC \u0026amp; HDM heaters, leads longer than 60\" require a splice.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-39 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-22 for specific Cartridge Heater Ordering Information. \u003c\/em\u003e\u003cem\u003e \u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType M1: Polyolefin Liquid Barrier\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C601_M1_dim.jpg?Medium\" width=\"223\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C601_M1_dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA liquid barrier used for low temperature applications primarily in refrigeration or food service applications. The seal bonds to both the heater and the leads.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eThree conductor SJO type cord.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable only in certain diameters. Heaters smaller than 1\/2\" diameter require an adapter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-40 for additional \u003c\/em\u003e\u003cem\u003elead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType M2: Potted End Seal\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC092.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC092.jpg\" width=\"223\" height=\"165\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC092.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003ePotted end seals help to protect the heater from moisture or contamination from plastic material, cleaning solvents, or oils. The bottom end disc seal is welded in.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2A: Cement potting with silicone varnish. Fiberglass lead wires externally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2B: Silicone rubber potting. Silicone rubber lead wires internally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSilicone rubber potting temperature rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2C: High temperature epoxy potting. Teflon® lead wires internally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHigh temp. epoxy potting temp. rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2D: Low temperature epoxy potting. Teflon® lead wires internally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLow temp. epoxy potting temp. rating: 266°F (130°C), UL rated to 194°F (90°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2E: Cement potting with silicone varnish. Fiberglass lead wires internally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (548°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum of 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e \u003cstrong\u003eM2A\u003c\/strong\u003e and \u003cstrong\u003eM2E\u003c\/strong\u003e are available through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-40 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType M3: \u003cspan\u003eTeflon® End Plug Seal\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC004.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC004.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC004.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStandard Termination for Hi-Density Miniature Cartridge Heaters.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA moisture resistant Teflon® seal that is swaged in during the manufacturing process with Teflon® insulated lead wire.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required for most heater sizes.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTeflon\u003csup\u003e®\u003c\/sup\u003e seal Temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire Temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads. Leads longer than 60\" require a splice.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-40 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType SA: Sealed Corrugated Armor Cable\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC076.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC076.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC076.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA liquid-proof stainless steel corrugated metal hose is silver brazed to the end of the cartridge heater. The end disc of the heater is also welded or brazed. This termination provides a positive seal against moisture and contamination entering the heater.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) cable over 12\" (305 mm) leads. Specify longer leads or cable.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-41 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information. \u003c\/em\u003e\u003cem\u003e \u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType S1: Flexible Spring\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 169px;\"\u003e\n\u003ctd style=\"text-align: center; height: 169px;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC005.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC005.jpg\" width=\"224\" height=\"165\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC005.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 134px;\"\u003e\n\u003ctd style=\"height: 134px;\"\u003e  \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C005_S1A_Fig1_Dim.jpg?Medium\" alt=\"Type S1 Fig. 1\" width=\"224\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C005_S1A_Fig1_Dim.jpg?Medium\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C006_S1A_Fig2_Dim.jpg?Medium\" alt=\"Type S1 Fig 2\" width=\"223\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C006_S1A_Fig2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 20.1719px;\"\u003e\n\u003ctd style=\"height: 20.1719px;\"\u003e\n\u003cp\u003e\u003cem\u003eThe leads are reinforced with a steel spring for applications with extreme flexing. The spring is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eS1A Mechanically fastened spring. S1B Silver brazed spring.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-41 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 514.594px;\" data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 457.594px;\" colspan=\"8\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions for Type S1\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 140px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 120px;\" colspan=\"2\" data-mce-fragment=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 24px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 70px;\" colspan=\"2\" data-mce-fragment=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth style=\"width: 103.594px;\" colspan=\"2\" data-mce-fragment=\"1\"\u003e“B” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 140px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 86px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 34px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 24px;\" data-mce-fragment=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 36px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 34px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 74.5938px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 140px; text-align: center;\" rowspan=\"7\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e13\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e20.64\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 140px; text-align: center;\" rowspan=\"9\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e13\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e20.64\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType W: Wire Braided Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"158\" width=\"272\" alt=\"Type W Fig. 1\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C0010_W_Fig1_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C0010_W_Fig1_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eStainless steel braid over fiberglass leads offers sharp bending not possible with armor cable, as well as abrasion protection.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating for standard HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) braid over 12\" (305 mm) leads. Specify longer braid\/leads\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003e\u003cem\u003eSee reference pages 2-13 and 2-42 \u003c\/em\u003e\u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"7\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions for Type W\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth width=\"130\" colspan=\"2\" data-mce-fragment=\"1\"\u003e“A” Dim.\/HD\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“A” Dim.\/LD\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong\u003e* For Type W Miniature Cartridge Heater dimensions Call us at (844) 862-7880.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType W3: Swaged-In Wire Braided Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"202\" width=\"273\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC013.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC013.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC013.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStainless steel braid over fiberglass leads offers sharp bending not possible with armor cable, as well as abrasion protection. In addition, Type W3 offers contamination resistance due to the Teflon® seal required for holding the wire braid.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTeflon® Seal temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) braid over 12\" (305 mm) leads. Specify longer braid\/leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-42 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType CS: Straight Armor Cable Directly Attached to Sheath\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC012.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC012.jpg\" width=\"253\" height=\"186\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC012.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe armor cable is directly attached to the cartridge heater, eliminating the coupling, to maintain an overall diameter equal to or smaller than the cartridge diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHeaters with an OD of 3\/4\" or larger require reducing diameter washer.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) cable over 12\" (305 mm) leads. Specify longer leads or cable.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-43 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C1: Straight Armor Cable with Coupling\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C041_C1A_Fig1_Dim.jpg?Medium\" alt=\"Type C1 Fig. 1\" width=\"225\" height=\"131\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C041_C1A_Fig1_Dim.jpg?Medium\"\u003e\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C042_C1A_Fig2_Dim.jpg?Medium\" alt=\"Type C1 Fig. 2\" width=\"225\" height=\"131\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C042_C1A_Fig2_Dim.jpg?Medium\"\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eArmor cable provides the maximum in protection for abrasive, jagged environments. The coupling between the cartridge and the armor cable is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e* Limited to C1B: SS Cable, Mechanically Fastened for 1\/8\" Miniature Cartridge Heaters\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC1A: Galvanized armor cable, mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC1B: Stainless steel armor cable, mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC1C: Galvanized armor cable, silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC1D: Stainless steel armor cable, silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) cable over 12\" (305 mm) leads. Specify longer leads or cable.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-43 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable style=\"width: 474px;\" data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" style=\"width: 169px;\" data-mce-fragment=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 55px;\" data-mce-fragment=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 66px;\" data-mce-fragment=\"1\"\u003e“B” Dim.\u003c\/th\u003e\n\u003cth style=\"width: 40.3125px;\" data-mce-fragment=\"1\"\u003eCable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 126px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 16px;\" data-mce-fragment=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 39px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 40.3125px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29.6875px;\" data-mce-fragment=\"1\"\u003eDia.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"7\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e13\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e20.64\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"8\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e13\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e20.64\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2­\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R1: Right-Angle Leads with Copper Elbow\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left;\"\u003e\n\u003cimg height=\"131\" width=\"225\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C014_R1A_Fig1_Dim.jpg?Medium\" alt=\"Type R1 Fig. 1\"\u003e\u003cimg height=\"131\" width=\"225\" alt=\"Type R1 Fig. 2\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C065_R1A_Fig2_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C065_R1A_Fig2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThis termination is used when space is limited. The copper elbow is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e R1A: Mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e R1B: Silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e Standard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e Standard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e R1A is available through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-44 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 474px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 474px;\" data-mce-selected=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" style=\"width: 169px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 169px;\" data-mce-selected=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 55px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 55px;\" data-mce-selected=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"3\" style=\"width: 66px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 66px;\"\u003e“B” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 126px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px;\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 16px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px;\" data-mce-selected=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 39px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px;\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29.6875px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px;\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"7\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px; text-align: center;\" data-mce-selected=\"1\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e44.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"10\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px; text-align: center;\" data-mce-selected=\"1\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e—\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e34.93­\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 12px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 8.17188px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R2: Right-Angle Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C044_R2A_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C044_R2A_Dim.jpg?Medium\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cp\u003e\u003cem\u003eThis termination is used when space is limited. Not suitable for abrasive environments. Same as C3 and W1 except plain leads. Various lead end finishes are available as listed below:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2A: Cement potting, no lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2B: Cement potting, welded lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2C: Silicone rubber potting, welded lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSilicone Rubber potting temperature rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard silicone rubber lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2D: High temperature epoxy potting, welded lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHigh Temperature epoxy potting temperature rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard Teflon® lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2E: Low temperature epoxy potting, welded lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLow Temperature epoxy potting temperature rating: 266°F (130°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard Teflon® lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify other lead lengths.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2A and R2B are available through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-45 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable height=\"526\" style=\"width: 474px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 474px;\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" style=\"width: 169px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 169px;\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px;\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 55px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 55px;\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"3\" style=\"width: 66px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 66px;\"\u003e“B” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 126px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 126px;\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 16px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px;\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 39px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29.6875px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px;\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"7\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 126px; text-align: center;\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e44.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"9\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 126px; text-align: center;\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e—\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType S2: Right-Angle Spring\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cimg alt=\"Type S2 Fig. 1\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C007_S2A_Fig1_Dim.jpg?Medium\" width=\"223\" height=\"130\"\u003e  \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C008_S2A_Fig2_Dim.jpg?Medium\" alt=\"Type S2 Fig. 2\" width=\"224\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C008_S2A_Fig2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe leads are reinforced with a steel spring for applications with extreme flexing. The spring is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eS2A: Mechanically fastened spring\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eS2B: Silver brazed spring\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-45 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable height=\"526\" style=\"width: 474px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 474px;\" data-mce-selected=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" style=\"width: 169px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 169px;\" data-mce-selected=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 55px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 55px;\" data-mce-selected=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"3\" style=\"width: 66px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 66px;\"\u003e“B” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 126px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px;\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 16px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px;\" data-mce-selected=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 39px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px;\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29.6875px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px;\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"7\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px; text-align: center;\" data-mce-selected=\"1\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e44.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"9\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px; text-align: center;\" data-mce-selected=\"1\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e—\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType W1: Right-Angle Wire Braided Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C056_W1A_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C056_W1A_Dim.jpg?Medium\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStainless steel braid over fiberglass leads for abrasion protection, mechanically crimped to the cartridge sheath at 90°. Wire braid offers extreme flexibility not possible with armor cable. Various lead end finishes are available as listed below.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eW1A: Cement potting and silicone varnish, no lead end disc.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eW1B: Welded lead end disc.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) braid over 12\" (305 mm) leads. Specify longer braid or leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-46 for additional termination recommendations.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"6\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions for W1\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth colspan=\"2\" width=\"130\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eAvailability\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eHD\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eLD\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cspan\u003e—\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e—\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e Yes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/16\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cspan\u003e7.94\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e Yes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C2: Right-Angle Armor Cable with Copper Elbow\u003c\/h4\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\n\u003cimg alt=\"Type C2 Fig. 1\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C055_C2A_Fig1_Dim.jpg?Medium\" width=\"224\" height=\"130\"\u003e   \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C015_C2A_Fig2_Dim.jpg?Medium\" alt=\"Type C2 Fig. 2\" width=\"224\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C015_C2A_Fig2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cp\u003e\u003cem\u003eArmor cable provides the maximum in protection for abrasive, jagged environments. The copper elbow between the cartridge and the armor cable is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2A: Galvanized armor cable, mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2B: Stainless steel armor cable, mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2C: Galvanized armor cable, silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2D: Stainless steel armor cable, silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC:482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) cable over 12\" (305 mm) leads. Specify longer cable or leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2A and C2B are available through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.\u003c\/em\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-47 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"8\"\u003eDimensions for Type C2 Hi-Density Cartridge Heaters\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eDiameter\u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“B” Dim.\u003c\/th\u003e\n\u003cth\u003eCable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003eFig.\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003eDia.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e44.45\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/8 \u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"8\"\u003eDimensions for Type C2 Low Density Cartridge Heaters\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eDiameter\u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“B” Dim.\u003c\/th\u003e\n\u003cth\u003eCable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003eFig.\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003eDia.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/8 \u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/8 \u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C3: Right-Angle Armor Cable\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C045_C3A_Dim.jpg?Medium\" width=\"304\" height=\"177\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C045_C3A_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eUse this termination when space is limited and maximum protection is required. The armor cable is tack welded or silver brazed to the cartridge sheath at 90°. The sheath extension is potted with cement. Various lead end finishes are available as listed below.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC3A: Cement potting and silicone varnish with no lead end disc, galvanized cable\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC3B: Cement potting and silicone varnish with no lead end disc, stainless steel cable\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC3C: Welded lead end disc, with galvanized cable\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC3D: Welded lead end disc, with stainless steel cable\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) armor cable over 12\" (305 mm) leads. Specify longer cable or leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-13 and 2-47 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003eAvailability\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"2\" width=\"130\" data-mce-fragment=\"1\"\u003eArmor Cable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eHD\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eLD\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType T2: Screw Terminals\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C021_T2_Dim.jpg?Medium\" width=\"313\" height=\"182\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C021_T2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor use with leads, crimp terminals, or bus bars. Includes washers and nuts.  Minimum 1\/2\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eDiameters available:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHDC – 5\/8\", 3\/4\", 1\"\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHDM – 16 mm and 20 mm\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard: screw #8-32\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 48 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType B: Heat Resistant Ceramic Bead Insulation\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC023.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC023.jpg\" width=\"253\" height=\"187\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC023.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe ultimate in high temperature lead protection. Allows for the attachment of flexible leads to the heater away from the high heat area. Used when the ambient temperature exceeds 842°F (450°C).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) solid nickel pins insulated with ball and socket construction type ceramic beads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-48 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType BL: Heat Resistant Ceramic Bead Insulation with Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC603.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC603.jpg\" width=\"233\" height=\"172\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC603.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"item\"\u003e\n\u003cdiv class=\"otherStuff\"\u003e\n\u003cdiv id=\"FullDetailsHolder_8114\" class=\"FullDetailsHolder\"\u003e\n\u003cdiv class=\"DataDetail New100 CenterZone TitanBlock\" blockinfo=\"DataDetail New100 CenterZone TitanBlock\"\u003e\n\u003cdiv class=\"oneDetail\"\u003e\n\u003cdiv class=\"item\"\u003e\n\u003cdiv class=\"MainContent\"\u003e\n\u003cem\u003eHigh temperature flexible leads are connected away from the high heat area.\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"MainContent\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 6\" (254 mm) solid nickel pins insulated with ball and socket construction type ceramic beads and 10\" (254 mm) fiberglass leads rated at 842°F (450°C). Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-48 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType T4: Double-End Terminal Pin\u003c\/h4\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C017_T4A_Dim.jpg?Medium\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor those applications in which wiring from both ends is an advantage. Various seals are available:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eT4A: Cement potting seal with silicone varnish\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eT4B: High temp. moisture resistant epoxy seal\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHigh temp. epoxy temp. rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eT4C: Low temp. moisture resistant epoxy seal\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLow temp. epoxy temp. rating: 266°F (130°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 1\" unheated section at each end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cem\u003eStandard terminal pin length is 2\".\u003c\/em\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 49 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType F1: Double-End Flexible Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC016.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC016.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC016.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor applications in which it is an advantage to wire from both ends. The leads are internally connected and can be bent sharply as they exit the potted ends. Various seals are available:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eF1A: Fiberglass leads with cement potting seal and silicone varnish\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (532°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eF1B: Teflon® leads with high temp. moisture resistant epoxy seal\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHigh temp. epoxy temperature rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eF1C: Teflon® leads with low temp. moisture resistant epoxy seal\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLow temp. epoxy temperature rating: 266°F (130°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 1\" unheated section at each end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLeads longer than 60\" require a splice.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 49 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/em\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType T3: Double-End Screw Terminal Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C022_T3_Dim.jpg?Medium\" width=\"294\" height=\"171\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C022_T3_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eA Double-Ended heater with quick change wiring screw terminals. Includes zinc plated washers and nuts.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 1\/2\" unheated section at each end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard screw sizes:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e1\/2\" diameter – #8-32 × 3\/4\" screws\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e5\/8\" to 1-1\/4\" diameter – #10-32 × 3\/4\" screws\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 49 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTermination Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType S3: Lead Wire Strain Relief\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 464px;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C009_S3_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C009_S3_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 464px;\"\u003e\n\u003cp\u003e\u003cem\u003eStrain relief clip for leads subject to tension and stress. A “T” type strain relief is silver brazed to the sheath.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-52 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional strain relief specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType S4: Right-Angle Lead Wire Strain Relief\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"193\" width=\"332\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C064_S4_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C064_S4_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStrain relief clip for leads subject to tension and stress. A “T” type strain relief is silver brazed to the sheath and bent at a 90° angle.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-52 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional strain relief specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTerminal Box Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E1: General Purpose Terminal Box\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e        \u003cimg height=\"164\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC599.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC599.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC599.jpg?Small\"\u003e       \u003cimg height=\"133\" width=\"152\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C600_E1_BoxOnly_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C600_E1_BoxOnly_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eGeneral purpose Stainless Steel NEMA 1 electrical enclosure designed to provide protection from electrical shock. The boxes have a 5\/8\" conduit knockout and are welded or brazed to the cartridge sheath.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eA termination must be specified separately.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program For 2nd or 3rd Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003ePlease contact us at (844) 862-7880 should you have any questions or need additional information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-13 and 2-54 \u003c\/em\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E2: Moisture Proof Terminal Box\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e       \u003cimg height=\"164\" width=\"222\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC070.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC070.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC070.jpg?Small\"\u003e     \u003cimg height=\"134\" width=\"153\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C604_E2_BoxOnly_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C604_E2_BoxOnly_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eNEMA 4 aluminum electrical enclosures provide protection from splashing or hose directed water, external condensation and water seepage. The box is mechanically attached to the cartridge sheath.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA single 5\/8\" access hole is standard.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA termination must be specified separately.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003e\u003cem\u003eSee reference page 2-54 \u003c\/em\u003e\u003c\/em\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E3: Explosion Resistant Terminal Boxes\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg height=\"186\" width=\"253\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC562.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC562.jpg\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eGeneral purpose Stainless Steel NEMA 1 electrical enclosure designed to provide protection from electrical shock. The box is welded or brazed to the cartridge sheath.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-55 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A termination must be specified separately.\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"7\"\u003eHousing E3C Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater\u003c\/th\u003e\n\u003cth\u003eHub Size\u003c\/th\u003e\n\u003cth\u003e“A”\u003c\/th\u003e\n\u003cth\u003e“B”\u003c\/th\u003e\n\u003cth\u003e“C”\u003c\/th\u003e\n\u003cth\u003e“D”\u003c\/th\u003e\n\u003cth\u003e“E”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter(s)\u003c\/th\u003e\n\u003cth\u003eNPT\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/2 \u0026amp; 5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"7\"\u003eHousing E3D Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater\u003c\/th\u003e\n\u003cth\u003eHub Size\u003c\/th\u003e\n\u003cth\u003e“A”\u003c\/th\u003e\n\u003cth\u003e“B”\u003c\/th\u003e\n\u003cth\u003e“C”\u003c\/th\u003e\n\u003cth\u003e“D”\u003c\/th\u003e\n\u003cth\u003e“E”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter(s)\u003c\/th\u003e\n\u003cth\u003eNPT\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/2 \u0026amp; 5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"7\"\u003eHousing E3L Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater\u003c\/th\u003e\n\u003cth\u003eHub Size\u003c\/th\u003e\n\u003cth\u003e“A”\u003c\/th\u003e\n\u003cth\u003e“B”\u003c\/th\u003e\n\u003cth\u003e“C”\u003c\/th\u003e\n\u003cth\u003e“D”\u003c\/th\u003e\n\u003cth\u003e“E”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter(s)\u003c\/th\u003e\n\u003cth\u003eNPT\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/2 \u0026amp; 5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e Explosion resistant terminal housings are intended to provide containment of anexplosion in the enclosure only. No portion of the heater assembly outside the enclosure  is covered under this NEMA rating. Abnormal use of a heater which results in excessive temperature can create hazardous conditions such as a fire. Never perform any type of service or remove the housing cover prior to disconnecting all electrical power to the heater.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E4: General Purpose Terminal Box (Mailbox Style)\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e        \u003cimg height=\"186\" width=\"252\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC566Rev.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC566Rev.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC566Rev.jpg?Small\"\u003e \u003cimg height=\"134\" width=\"153\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C564_E4_BoxOnly_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C564_E4_BoxOnly_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eGeneral purpose steel NEMA 1 electrical enclosure designed to provide protection from electrical shock. The box is welded to the cartridge sheath.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003eA termination must be specified separately.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-54 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E5: Octagon Terminal Box\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e       \u003cimg height=\"127\" width=\"172\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC608.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC608.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC608.jpg?Small\"\u003e                  \u003cimg height=\"142\" width=\"162\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C609_E5_BoxOnly_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C609_E5_BoxOnly_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eNEMA 4\/7 electrical enclosures provide protection from contaminants, moisture, and hazardous conditions. These housings are screwed onto a heater with a single or double ended Brass or Stainless Steel fitting.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA threaded fitting mounting termination must be specified. See reference pages 2-50 and 2-51.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eOther terminal box configurations available upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-54 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLead End Connection Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType RT: Ring Terminal\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"157\" width=\"213\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC095.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC095.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC095.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eVarious types of crimp terminals can be attached to the heater leads to make wiring into applications quick and easy. Non-insulated and insulated with nylon (221°F\/105°C) or PVC (194°F\/90°C).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead end connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType ST: Ring Terminal\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg height=\"164\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC098.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC098.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC098.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eVarious types of crimp terminals can be attached to the heater leads to make wiring into applications quick and easy. Non-insulated and insulated with nylon (221°F\/105°C) or PVC (194°F\/90°C).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead end connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType QTA: 1\/4\" Female Straight Quick Disconnect\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"164\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC094.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC094.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC094.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eVarious types of crimp terminals can be attached to the heater leads to make wiring into applications quick and easy. Non-insulated and insulated with nylon (221°F\/105°C) or PVC (194°F\/90°C).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead end connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType QTA: 1\/4\" Female Right-Angle Quick Disconnect\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"165\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC093.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC093.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC093.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eVarious types of crimp terminals can be attached to the heater leads to make wiring into applications quick and easy. Non-insulated and insulated with nylon (221°F\/105°C) or PVC (194°F\/90°C).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead end connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType P: Quick Disconnect Plugs\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"193\" width=\"193\" alt=\"\/Tempco\/Data-Assets\/15-Accessories-Images\/WebT123.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/15-Accessories-Images\/WebT123.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/15-Accessories-Images\/WebT123.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eAllows for the quick and easy replacement of the heater. The plug can be attached to galvanized armor cable, stainless steel armor cable, or wire braid.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-12 and 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLead Wire Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType MIL: High Temperature Lead Wire\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003eWhen required, high temperature lead wire can be used on most cartridge heaters. The stranded wire is insulated with mica tapes and then a treated fiberglass overbraid.\u003c\/em\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eMaximum temperature rating: 450°C (842°F)\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TL: Teflon® Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eMaximum temperature rating: 200°C (392°F)\u003c\/em\u003e\u003cem style=\"font-size: 1.4em;\"\u003e \u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType HA: Heat Shrink covered Armor Cables\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eEither the galvanized or stainless steel armor cable can be covered with moisture proof heat shrink PVC tubing.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType HTL: Very High Temperature Lead Wire\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003eWhen required, high temperature lead wire can be used on most cartridge heaters. The stranded wire is insulated with mica composite and then a treated fiberglass overbraid.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable wire gauge sizes: 10-18\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMaximum temperature rating: 550°C (1022°F)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType SR: Silicone Rubber Coated Fiberglass Sleeving\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003eFor added protection, strength, and resistance to various chemicals, the lead wires can be covered with silicone rubber sleeving.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSRA Silicone rubber coated fiberglass sleeving on each lead separately\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSRB Silicone rubber coated fiberglass sleeving on both leads together\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSpecify length when ordering.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMaximum temperature rating: 200°C (392°F)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSheath Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType CM: Single Threaded Fitting\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e        \u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"146\" width=\"253\" alt=\"Type CM Fig. 1 - Fitting Flush with Lead End of Sheath\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C030_CMA_Fig1_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C030_CMA_Fig1_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"146\" width=\"252\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C030b_CMV_Fig2_Dim.jpg?Medium\" alt=\"Type CM Fig. 2 - Fitting offset from Lead End of Sheath\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cspan\u003eType CM Fig. 1 - Fitting Flush with Lead End of Sheath\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cspan\u003eType CM Fig. 2 - Fitting offset from Lead End of Sheath\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003eCMA\/CMN:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cem\u003e Low temperature epoxy potting — 266°F (130°C), UL rated to 194°F (90°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMB\/CMP:\u003c\/strong\u003e Hi-temp cement potting with silicone varnish — 1000°F (538°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eFiberglass leads internally connected, rated 482°F (250°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMC\/CMQ:\u003c\/strong\u003e Silicone rubber potting — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eSilicone rubber leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMD\/CMR:\u003c\/strong\u003e High temperature epoxy potting — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMV:\u003c\/strong\u003e Brass Fitting\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMW:\u003c\/strong\u003e Stainless Steel Fitting\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA minimum of 1\/4\" cold section below the bushing is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSpecify offset dimension \"E\" when ordering.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA termination must be specified separately.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMB\u003c\/strong\u003e \u0026amp; \u003cstrong\u003eCMP\u003c\/strong\u003e are available through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-50 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-23 for Hi-Density Cartridge Immersion Heater specifically designed for Heating Water and Other Liquids.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"5\" data-mce-fragment=\"1\"\u003eStandard NPT Bushing Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"5\" data-mce-fragment=\"1\"\u003e(Fig. 1 \u0026amp; Fig. 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003eHeater Diameter\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eNPT\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003e(in)\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eSize\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e“A”\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e“B”\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e“C”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1⁄8-27\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1⁄4-18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1\/2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3⁄8-18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1⁄2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3⁄4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11⁄4-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"3\" data-mce-fragment=\"1\"\u003eType Codes for Single Threaded Fittings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003eFitting Material\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003ePotting Seal Type\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eBrass\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eStainless Steel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eLow Temp Epoxy\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMA\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eHi-Temp Cement\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMB\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eSilicone Rubber\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMC\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMQ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eHi-Temp Epoxy\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMD\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fitting can be offset from end of sheath. See Figure 2.\u003c\/em\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType CN: Double Threaded Fitting\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C029_CNA_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C029_CNA_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003ePotted end seals help to protect the heater from moisture or contamination from plastic material, cleaning solvents, or oils. The bushing cavity can be sealed with various materials such as:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCNA\/CNN:\u003c\/strong\u003e Low temperature epoxy potting — 266°F (130°C), UL rated to 194°F (90°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCNB\/CNP:\u003c\/strong\u003e Hi-temp cement potting w\/ silicone varnish — 1000°F (538°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eFiberglass leads internally connected, rated 482°F (250°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCNC\/CNQ:\u003c\/strong\u003e Silicone rubber potting — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eSilicone rubber leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCND\/CNR:\u003c\/strong\u003e High temperature epoxy potting — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA minimum of 1\/4\" cold section below the bushing is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA termination must be specified separately\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 51 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-23 for Hi-Density Cartridge Immersion Heater specifically designed for Heating Water and Other Liquids.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"5\"\u003eStandard NPT Bushing Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater Diameter\u003c\/th\u003e\n\u003cth\u003eNPT\u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e“A”\u003c\/th\u003e\n\u003cth\u003e“B”\u003c\/th\u003e\n\u003cth\u003e“C”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1⁄8-27\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1⁄4-18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3⁄8-18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1⁄2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3⁄4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e7\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1-1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11⁄4-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003eType Codes for Double Threaded Fittings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eFitting Material\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePotting Seal Type\u003c\/th\u003e\n\u003cth\u003eBrass\u003c\/th\u003e\n\u003cth\u003eStainless Steel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eLow Temp Epoxy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNA\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eHi-Temp Cement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNB\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eSilicone Rubber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNC\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNQ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eHi-Temp Epoxy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCND\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TH: Top Hat Screw Plug\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/TopHatSide_TH_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/TopHatSide_TH_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eLow temperature epoxy potting — 266°F (130°C), UL rated to 194°F (90°C)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-51 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType BF: Bulkhead Fitting\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC026.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC026.jpg?Small\" width=\"252\" height=\"186\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eA 5\/8-18 UNF fitting is attached to the end of the cartridge heater to allow for mounting the heater to the wall of a tank or enclosure. Brass fittings are silver brazed and stainless steel fittings are heli-arc welded. Includes a copper washer and jam nut. The lead wires are internally connected. Available with the potting seals listed in the table.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePotted end seals help to protect the heater from moisture or contamination from plastic material, cleaning solvents, or oils. The fitting cavity can be sealed with various materials such as:\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBFA\/BFJ Low temperature epoxy potting\u003c\/strong\u003e — 266°F (130°C), UL rated to 194°F (90°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBFB\/BFK Silicone rubber potting\u003c\/strong\u003e — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eSilicone rubber leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBFC\/BFL High temperature epoxy potting\u003c\/strong\u003e — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A minimum of 1\/4\" cold section below the bushing is required.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-51 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"3\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eType Codes for Bulkhead Fittings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eFitting Material\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003ePotting Seal Type\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBrass\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eStainless Steel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLow Temp Epoxy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFA\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSilicone Rubber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFB\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHi-Temp Epoxy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFC\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType MFR: Mounting Flange\/Round\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC025.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC025.jpg\" width=\"257\" height=\"189\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC025.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eRecommended for applications where excessive vibration exists and may cause the heater to back out of its mounting hole. The 16 ga. 304 SS flange is used as a means of securing the cartridge heater in place. The default position of the flange is flush with the lead end. Specify the position of the flange when ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping with flush flange only\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCustom Mounting Flanges available upon request. Consult us with your requirements (844) 862-7880.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-52 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"7\" data-mce-fragment=\"1\"\u003eStandard Round Mounting Flanges\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003eHeater Diameters\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“F”\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“C”\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“H”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4 (6.35), 5\/16 (7.94), 3\/8 (9.53), 1\/2 (12.70), 5\/8 (15.88), 3\/4 (19.05)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e38.10\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e28.57\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e.156\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.97\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8 (22.23), 1 (25.40),1-1\/4 (31.80)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e50.80\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e41.28\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e.203\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType MFH: Mounting Flange\/Hexagon\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"202\" width=\"274\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC068.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC068.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC068.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA hex shape allows the possibility of using a wrench when removal is tight. The 16 gage. 304 SS flange is used as a means of securing the cartridge heater in place. The default position of the flange is flush with the lead end. Specify the position of the flange when ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eCustom Mounting Flanges available upon request. Consult us with your requirements (844) 862-7880.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-52 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStandard Hex Mounting Flanges\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eHeater   Diameter\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e“F”\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e“C”\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e“H”\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003emm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003emm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003emm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003emm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.144\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3.66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e25.40\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3\/4\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.144\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3.66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e25.40\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3\/4\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.144\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3.66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-5\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e29.37\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.187\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e4.76\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-5\/32\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e29.37\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.187\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e4.76\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-5\/32\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e29.37\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.187\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e4.76\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e22.26\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e47.63\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e39.69\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.203\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e5.16\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-7\/8\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e47.63\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-9\/16\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e39.69\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.203\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e5.16\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e31.80\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-7\/8\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e47.63\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-11\/16\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e42.86\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.203\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e5.16\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R3: Angled Sheath Extension\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"188\" width=\"324\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C018_R3_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C018_R3_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe sheath extension is silver brazed to the cartridge at a 90° angle. The leads are internally connected. The standard sheath extension is 3\/8\" long. Specify when ordering if a longer sheath extension is required. If abrasion resistance is required, armor cable or stainless steel wire braid can be attached to the sheath extension. Available with various lead wire types and potted end seals.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping (cement potting only)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R4: Bent Cartridge\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"188\" width=\"323\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C019_R4_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C019_R4_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe heater sheath itself is bent to 90°. The bend is through a required unheated section. The standard sheath extension past the bend is 1\". Specify when ordering if a longer sheath is required.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e Cartridge Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003ein\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003emm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e6.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e9.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e19.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e25.40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003eBend Radius\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e19.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e25.40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e31.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e38.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConsult us (844) 862-7880 for Miniature Cartridge Heater Bend Radius details.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R5: Square Block with Tube Extension\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"187\" width=\"322\" alt=\"Type R5\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/R5_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/R5_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe tube extension is silver brazed or tack welded to a square S\/S block. The standard tube length is 1\", but different lengths can be specified. Available with various lead wire types, abrasion resistant options or potted end seals.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eHeater Diameter\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“A”\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“B”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e9.52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.87\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.87\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType LR: Locating Ring\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"206\" width=\"354\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C069_LR_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C069_LR_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA locating ring can be attached to the heater to aid in positioning the heater for the application. The default position of the ring is 1\/4\" from the lead end. Specify the position of the ring when ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping!\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-12 and 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType PS: Pull Strap\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg height=\"252\" width=\"342\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC011.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC011.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC011.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA nickel wire rope is silver brazed to the lead end of the cartridge heater sheath to assist in removing the heater.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eIn stock and available through the Hi-Density Cartridge Heater Terminator Program.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-12 and 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType IS: Incolony Sheath\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003eThe standard sheath material for all Hi-Density Cartridge Heaters except 1\" diameter is 321 stainless steel; standard for 1\" diameter is 304 stainless steel. The Incoloy Sheath option is available on all diameters except 1\/8\", 5\/16\", 8 mm and 20 mm.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003eTo assist you in selecting the proper sheath material, corrosion resistant ratings and chemical properties of various heater sheath materials are given in the Engineering Section of the site.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType DSM: Other Special Sheath Materials\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eIf your application requires a specific alloy sheath material, consult IHS at (844) 862-7880 with your requirements. \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003e\u003cstrong\u003efor additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType PAS: Passivation\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003ePassivating is a chemical process accomplished by dipping the heater in a solution of nitric acid. The process removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType OAL: Special Length Tolerances\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003eIf a special length tolerance different than the standard length tolerance specified on reference pages 2, 3, and 4 is required, then consult IHS at (844) 862-7880 with your requirements.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType ELP: Electro-Polish\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003eElectro-Polishing is an electro-chemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the heater sheath.\u003c\/em\u003e\u003c\/span\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType CG: Centerless Grinding\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor applications requiring high precision fit and tolerance, the sheath can be centerless ground. Tolerance: ±0.0005 inches (0.013 mm) Specify diameter when ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSensor Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ1 and TK1: Grounded at Disc End\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC049.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC049.jpg?Small\" width=\"264\" height=\"194\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe thermocouple junction is grounded to the sheath at the disc end and packed with MgO. The concave end disc is filled with silver solder and ground flat. When inserted into a flat end blind hole, it will provide fast responsive temperature readings. Widely used in Hot Runner mold probes.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTJ1 Type J thermocouple\u003c\/em\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK1 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information..\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003e\u003cstrong\u003eANSI Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eK\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003eFor additional thermocouple types, consult IHS at (844) 862-7880.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ2 and TK2: Ungrounded at Disc End\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC050.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC050.jpg\" width=\"264\" height=\"195\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC050.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe thermocouple junction is ungrounded, located at the end of the heater section, 1\/8\" behind the end disc and packed with MgO. Only provides reference temperature reading of the part being heated – slower response.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eTJ2 Type J thermocouple\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK2 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003e\u003cstrong\u003eANSI Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eK\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003eFor additional  thermocouple types, consult IHS at (844) 862-7880.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ3 and TK3: Ungrounded at Center\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC051.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC051.jpg?Small\" width=\"304\" height=\"224\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe thermocouple junction is ungrounded and is located in the center of the length and diameter of the cartridge heater. It provides internal temperature readings of the heater core. Generally used for research applications and is not recommended for controlling process temperatures.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTJ3 Type J thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK3 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003eANSI Code\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eJ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eK\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003eFor additional thermocouple types, consult IHS at (844) 862-7880.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ4 and TK4: Grounded at Center\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC052.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC052.jpg\" width=\"323\" height=\"238\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC052.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eThe thermocouple junction is grounded to the sheath in a 1\/2\" unheated section located in the center of the cartridge length unless otherwise specified. It provides good temperature readings with quick response.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTJ4 Type J thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK4 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003e\u003cstrong\u003eANSI Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eK\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003eFor additional thermocouple types, consult IHS at (844) 862-7880.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ5 and TK5: Grounded at Lead End\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC053.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC053.jpg?Small\" width=\"323\" height=\"238\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe thermocouple junction is grounded to the sheath at the lead end. A minimum of 3\/8\" of cold section is required. It provides good temperature readings with quick response.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTJ5 Type J thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK5 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e For a complete selection of standard heaters with built-in Type J thermocouple for Hot Runner, please see the Pennybottom Cartridge Heater Section.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003e\u003cstrong\u003eANSI Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePostivie\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eK\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eFor additional thermocouple types, consult IHS at (844) 862-7880.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInternal Power Variations\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType DW: Distributed Wattage\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC072.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC072.jpg\" width=\"323\" height=\"238\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC072.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eCartridge heaters can be designed to vary the wattage along the length of the heater. Specify number of zones and the required watts and length per zone starting from the disk end. Leads can be connected externally or internally. Picture shows a heater with Type N externally connected leads. Heaters with other terminations may require a longer cold section at the lead end.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType 3PH: Three Phase\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg height=\"293\" width=\"293\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD10.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD10.jpg\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eIn order to minimize the gauge of the wiring on high wattage cartridge heaters, 3-phase elements can be designed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType DV: Dual Voltage\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg height=\"293\" width=\"293\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD20.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD20.jpg\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003e3\/8\" and 1\/2\" diameter heaters may require a larger diameter transition area at lead end. Cartridge heaters can be designed using 3-wire series\/parallel circuits for dual voltage applications. Whether the heater is run on the high or low voltage, the wattage will be the same. DV1 120\/240 volts DV2 240\/480 volts.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType DWV: Dual Circuits\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"293\" width=\"293\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD40.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD40.jpg\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eIndependent resistance elements can be designed in a single cartridge heater for added versatility.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType MHZ: Multiple Heat Zones\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cem\u003e\u003cimg height=\"292\" width=\"292\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD30.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD30.jpg\"\u003e \u003c\/em\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003e3\/8\" and 1\/2\" diameter heaters may require a larger diameter transition area at lead end. Multiple independently operated sections of the heater with a common wiring connection can be designed for increased flexibility.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType GJ: Grounded Element Winding\u003c\/h4\u003e\n\u003ctable width=\"363\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 202.047px;\"\u003e\n\u003ctd style=\"text-align: center; width: 464px; height: 202.047px;\"\u003e\n\u003cimg height=\"293\" width=\"293\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD60.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD60.jpg\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 464px; height: 10px;\"\u003e\n\u003cp\u003e\u003cem\u003eFor DC applications where the electrical circuit is negative grounded, the cartridge heater can be designed with one side of the element winding grounded to the sheath and a single lead wire exiting the cartridge heater.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType GL: Grounded Lead\/Sheath\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD50.jpg\" width=\"363\" height=\"363\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD50.jpg\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor those applications requiring a separate ground lead attached to the cartridge heater sheath. Standard ground lead wire is a 10\" long insulated stranded conductor. Optional insulated and color coded leads are available.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for 2nd Day Delivery.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TF: Thermal Fuses\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThermal fuses can be built into cartridge heaters to act as a high limit for the heater in applications where the temperature must be limited to avoid dangerous situations. When the trigger point is reached, the thermal fuse will open, cutting the electrical current to the cartridge heater. Once the thermal fuse opens, it cannot be reset. Many different trigger temperatures are available.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TS: Thermostat\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003eCartridge heaters with built-in thermostats are very efficient and economical for heating and controlling temperatures. Available with NPT or special type mounting fittings, they provide a self-contained heater mainly recommended for immersion applications. They can also be used as over-temperature safety devices. \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe thermostats are factory preset for the trip temperature; therefore, prototyping and testing is required to determine the exact fixed setpoint. Maximum temperature—302°F (150°C). Maximum Amps—8@120 Volts. A minimum 2-1\/2\" cold section is required to house the thermostat. Consult Tempco with your requirements. \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TM: Thermistor\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eTempco has the ability to custom design cartridge heaters with built-in temperature sensors such as thermistors and RTDs. For specific applications that have a limited or single set point range, thermistors or RTDs in conjunction with simple electronic controllers can be an economical choice. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For thermocouples see reference page 2-58. \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType RD: RTD Temperature Sensor\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eTempco has the ability to custom design cartridge heaters with built-in temperature sensors such as thermistors and RTDs. For specific applications that have a limited or single set point range, thermistors or RTDs in conjunction with simple electronic controllers can be an economical choice. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For thermocouples see reference page 2-58.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eStandard Electrical Tests \u0026amp; Optional Test Reports\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStandard Electrical Tests and Optional Test Reports\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e1. Resistance test — measures ohms at room temperature.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e2. IR (insulation resistance) test — measures the insulation resistance to the flow of current. Standard test is done at 500VDC.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e3. Hipot (high potential) test — a high voltage is applied between a product's current carrying conductors and its metallic enclosure to verify that the insulation is sufficient to protect the operator from electrical shock.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e4. Leakage current test — measures the current that flows from any conductive part to ground.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e5. Heaters can be serialized and test reports can be sent with each shipment if required. Contact IHS with your requirements at (844) 862-7880.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for Inspection Services and Test Report information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eDie Penetrant Test\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eThis non-destructive testing can detect imperfections in weld joints. For critical applications, each individual heater’s weld joints by end cap and fittings can be tested. Certified test reports will be sent with each shipment. Consult IHS for details (844) 862-7880.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for Inspection Services and Test Report information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eHydrostatic Pressure Test\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eCartridge heaters with attached pipe fittings can be pressure tested to your specifications at Tempco. Our in-house testing capabilities can ensure that your products meet your exact specifications. Contact IHS with your requirements at (844) 862-7880.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for Inspection Services and Test Report information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTypical Applications\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlastic Extruders\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHot Runner Molds\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHot Stamping\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMedical Equipment\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackaging Equipment\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMolds\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAerospace\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSealing Bags\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSemiconductor\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlastic Molding\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShoe Machinery\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFood Processing\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHeating Gases and Liquids\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eGlue Guns\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLaminating Presses\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlatens\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScientific Equipment\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFood Service Equipment\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e","published_at":"2021-11-04T15:30:24-04:00","created_at":"2021-11-04T15:29:44-04:00","vendor":"Tempco","type":"Business \u0026 Industrial","tags":["Electronics","Food \u0026 Beverage","Heaters","Manufacturing","Medical \u0026 Pharmaceutical Production","Plastic Fabrication","Process Heat","Replacement Parts","Tempco"],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39537227268173,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HDC00001","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Tempco Hi-Density Cartridge Heaters","public_title":null,"options":["Default Title"],"price":0,"weight":1361,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters.png?v=1636054186","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-1.png?v=1636140497","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-2.png?v=1636140501","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-3.png?v=1636140492","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-4.png?v=1636140496","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-5.png?v=1636140491","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-6.png?v=1636140493","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-7.png?v=1636140504","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-8.png?v=1636140494","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-9.png?v=1636140503","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-10.png?v=1636140492","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-11.png?v=1636140499","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-12.png?v=1636140505","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-13.png?v=1636140493","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-14.png?v=1636140498","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-15.png?v=1636140503","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-16.png?v=1636140496","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-17.png?v=1636140495","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-18.png?v=1636140494","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-19.png?v=1636140505","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-20.png?v=1636140501","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-41.png?v=1636140494","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-42.png?v=1636140502","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-21.png?v=1637166797","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-22.png?v=1637166796","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-71.png?v=1637166797","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-72.png?v=1637166800","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-73.png?v=1637166799","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-74.png?v=1637166802","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-75.png?v=1637166801","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-76.png?v=1637166799","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-77.png?v=1637166797","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-78.png?v=1637166796","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-79.png?v=1637166799","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-80.png?v=1637166798","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-81.png?v=1637166798","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-82.png?v=1637166798","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-83.png?v=1637166801","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-84.png?v=1637166796","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-85.png?v=1637166800","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-86.png?v=1637166798","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-87.png?v=1637166796","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-88.png?v=1637166796","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-89.png?v=1637166800","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-90.png?v=1637166800","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-91.png?v=1637166800","\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-92.png?v=1637166796"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters.png?v=1636054186","options":["Title"],"media":[{"alt":null,"id":21168247275597,"position":1,"preview_image":{"aspect_ratio":0.822,"height":720,"width":592,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters.png?v=1636054186"},"aspect_ratio":0.822,"height":720,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters.png?v=1636054186","width":592},{"alt":null,"id":21177447579725,"position":2,"preview_image":{"aspect_ratio":0.839,"height":831,"width":697,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-1.png?v=1636140497"},"aspect_ratio":0.839,"height":831,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-1.png?v=1636140497","width":697},{"alt":null,"id":21177447612493,"position":3,"preview_image":{"aspect_ratio":0.838,"height":827,"width":693,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-2.png?v=1636140501"},"aspect_ratio":0.838,"height":827,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-2.png?v=1636140501","width":693},{"alt":null,"id":21177447645261,"position":4,"preview_image":{"aspect_ratio":0.842,"height":825,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-3.png?v=1636140492"},"aspect_ratio":0.842,"height":825,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-3.png?v=1636140492","width":695},{"alt":null,"id":21177447678029,"position":5,"preview_image":{"aspect_ratio":0.835,"height":831,"width":694,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-4.png?v=1636140496"},"aspect_ratio":0.835,"height":831,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-4.png?v=1636140496","width":694},{"alt":null,"id":21177447710797,"position":6,"preview_image":{"aspect_ratio":0.834,"height":833,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-5.png?v=1636140491"},"aspect_ratio":0.834,"height":833,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-5.png?v=1636140491","width":695},{"alt":null,"id":21177447743565,"position":7,"preview_image":{"aspect_ratio":0.839,"height":828,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-6.png?v=1636140493"},"aspect_ratio":0.839,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-6.png?v=1636140493","width":695},{"alt":null,"id":21177447776333,"position":8,"preview_image":{"aspect_ratio":0.835,"height":834,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-7.png?v=1636140504"},"aspect_ratio":0.835,"height":834,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-7.png?v=1636140504","width":696},{"alt":null,"id":21177447809101,"position":9,"preview_image":{"aspect_ratio":0.835,"height":832,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-8.png?v=1636140494"},"aspect_ratio":0.835,"height":832,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-8.png?v=1636140494","width":695},{"alt":null,"id":21177447841869,"position":10,"preview_image":{"aspect_ratio":0.827,"height":837,"width":692,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-9.png?v=1636140503"},"aspect_ratio":0.827,"height":837,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-9.png?v=1636140503","width":692},{"alt":null,"id":21177447874637,"position":11,"preview_image":{"aspect_ratio":0.829,"height":837,"width":694,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-10.png?v=1636140492"},"aspect_ratio":0.829,"height":837,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-10.png?v=1636140492","width":694},{"alt":null,"id":21177447907405,"position":12,"preview_image":{"aspect_ratio":0.841,"height":828,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-11.png?v=1636140499"},"aspect_ratio":0.841,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-11.png?v=1636140499","width":696},{"alt":null,"id":21177447940173,"position":13,"preview_image":{"aspect_ratio":0.844,"height":826,"width":697,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-12.png?v=1636140505"},"aspect_ratio":0.844,"height":826,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-12.png?v=1636140505","width":697},{"alt":null,"id":21177447972941,"position":14,"preview_image":{"aspect_ratio":0.837,"height":828,"width":693,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-13.png?v=1636140493"},"aspect_ratio":0.837,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-13.png?v=1636140493","width":693},{"alt":null,"id":21177448005709,"position":15,"preview_image":{"aspect_ratio":0.834,"height":831,"width":693,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-14.png?v=1636140498"},"aspect_ratio":0.834,"height":831,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-14.png?v=1636140498","width":693},{"alt":null,"id":21177448038477,"position":16,"preview_image":{"aspect_ratio":0.842,"height":828,"width":697,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-15.png?v=1636140503"},"aspect_ratio":0.842,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-15.png?v=1636140503","width":697},{"alt":null,"id":21177448071245,"position":17,"preview_image":{"aspect_ratio":0.836,"height":829,"width":693,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-16.png?v=1636140496"},"aspect_ratio":0.836,"height":829,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-16.png?v=1636140496","width":693},{"alt":null,"id":21177448104013,"position":18,"preview_image":{"aspect_ratio":0.841,"height":829,"width":697,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-17.png?v=1636140495"},"aspect_ratio":0.841,"height":829,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-17.png?v=1636140495","width":697},{"alt":null,"id":21177448136781,"position":19,"preview_image":{"aspect_ratio":0.833,"height":834,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-18.png?v=1636140494"},"aspect_ratio":0.833,"height":834,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-18.png?v=1636140494","width":695},{"alt":null,"id":21177448169549,"position":20,"preview_image":{"aspect_ratio":0.836,"height":830,"width":694,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-19.png?v=1636140505"},"aspect_ratio":0.836,"height":830,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-19.png?v=1636140505","width":694},{"alt":null,"id":21177448202317,"position":21,"preview_image":{"aspect_ratio":0.846,"height":823,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-20.png?v=1636140501"},"aspect_ratio":0.846,"height":823,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-20.png?v=1636140501","width":696},{"alt":null,"id":21177448923213,"position":22,"preview_image":{"aspect_ratio":0.839,"height":828,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-41.png?v=1636140494"},"aspect_ratio":0.839,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-41.png?v=1636140494","width":695},{"alt":null,"id":21177448955981,"position":23,"preview_image":{"aspect_ratio":0.835,"height":834,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-42.png?v=1636140502"},"aspect_ratio":0.835,"height":834,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-42.png?v=1636140502","width":696},{"alt":null,"id":21246324572237,"position":24,"preview_image":{"aspect_ratio":0.836,"height":830,"width":694,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-21.png?v=1637166797"},"aspect_ratio":0.836,"height":830,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-21.png?v=1637166797","width":694},{"alt":null,"id":21246324605005,"position":25,"preview_image":{"aspect_ratio":0.843,"height":826,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-22.png?v=1637166796"},"aspect_ratio":0.843,"height":826,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-22.png?v=1637166796","width":696},{"alt":null,"id":21246324637773,"position":26,"preview_image":{"aspect_ratio":0.83,"height":829,"width":688,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-71.png?v=1637166797"},"aspect_ratio":0.83,"height":829,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-71.png?v=1637166797","width":688},{"alt":null,"id":21246324670541,"position":27,"preview_image":{"aspect_ratio":0.842,"height":824,"width":694,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-72.png?v=1637166800"},"aspect_ratio":0.842,"height":824,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-72.png?v=1637166800","width":694},{"alt":null,"id":21246324703309,"position":28,"preview_image":{"aspect_ratio":0.84,"height":827,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-73.png?v=1637166799"},"aspect_ratio":0.84,"height":827,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-73.png?v=1637166799","width":695},{"alt":null,"id":21246324736077,"position":29,"preview_image":{"aspect_ratio":0.843,"height":824,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-74.png?v=1637166802"},"aspect_ratio":0.843,"height":824,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-74.png?v=1637166802","width":695},{"alt":null,"id":21246324768845,"position":30,"preview_image":{"aspect_ratio":0.845,"height":824,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-75.png?v=1637166801"},"aspect_ratio":0.845,"height":824,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-75.png?v=1637166801","width":696},{"alt":null,"id":21246324801613,"position":31,"preview_image":{"aspect_ratio":0.842,"height":824,"width":694,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-76.png?v=1637166799"},"aspect_ratio":0.842,"height":824,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-76.png?v=1637166799","width":694},{"alt":null,"id":21246324834381,"position":32,"preview_image":{"aspect_ratio":0.839,"height":830,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-77.png?v=1637166797"},"aspect_ratio":0.839,"height":830,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-77.png?v=1637166797","width":696},{"alt":null,"id":21246324867149,"position":33,"preview_image":{"aspect_ratio":0.842,"height":827,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-78.png?v=1637166796"},"aspect_ratio":0.842,"height":827,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-78.png?v=1637166796","width":696},{"alt":null,"id":21246324899917,"position":34,"preview_image":{"aspect_ratio":0.846,"height":823,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-79.png?v=1637166799"},"aspect_ratio":0.846,"height":823,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-79.png?v=1637166799","width":696},{"alt":null,"id":21246324932685,"position":35,"preview_image":{"aspect_ratio":0.842,"height":825,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-80.png?v=1637166798"},"aspect_ratio":0.842,"height":825,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-80.png?v=1637166798","width":695},{"alt":null,"id":21246324965453,"position":36,"preview_image":{"aspect_ratio":0.836,"height":831,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-81.png?v=1637166798"},"aspect_ratio":0.836,"height":831,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-81.png?v=1637166798","width":695},{"alt":null,"id":21246324998221,"position":37,"preview_image":{"aspect_ratio":0.842,"height":828,"width":697,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-82.png?v=1637166798"},"aspect_ratio":0.842,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-82.png?v=1637166798","width":697},{"alt":null,"id":21246325030989,"position":38,"preview_image":{"aspect_ratio":0.832,"height":834,"width":694,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-83.png?v=1637166801"},"aspect_ratio":0.832,"height":834,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-83.png?v=1637166801","width":694},{"alt":null,"id":21246325063757,"position":39,"preview_image":{"aspect_ratio":0.839,"height":828,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-84.png?v=1637166796"},"aspect_ratio":0.839,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-84.png?v=1637166796","width":695},{"alt":null,"id":21246325096525,"position":40,"preview_image":{"aspect_ratio":0.84,"height":827,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-85.png?v=1637166800"},"aspect_ratio":0.84,"height":827,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-85.png?v=1637166800","width":695},{"alt":null,"id":21246325129293,"position":41,"preview_image":{"aspect_ratio":0.838,"height":832,"width":697,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-86.png?v=1637166798"},"aspect_ratio":0.838,"height":832,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-86.png?v=1637166798","width":697},{"alt":null,"id":21246325162061,"position":42,"preview_image":{"aspect_ratio":0.839,"height":830,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-87.png?v=1637166796"},"aspect_ratio":0.839,"height":830,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-87.png?v=1637166796","width":696},{"alt":null,"id":21246325194829,"position":43,"preview_image":{"aspect_ratio":0.834,"height":835,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-88.png?v=1637166796"},"aspect_ratio":0.834,"height":835,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-88.png?v=1637166796","width":696},{"alt":null,"id":21246325227597,"position":44,"preview_image":{"aspect_ratio":0.837,"height":828,"width":693,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-89.png?v=1637166800"},"aspect_ratio":0.837,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-89.png?v=1637166800","width":693},{"alt":null,"id":21246325260365,"position":45,"preview_image":{"aspect_ratio":0.838,"height":831,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-90.png?v=1637166800"},"aspect_ratio":0.838,"height":831,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-90.png?v=1637166800","width":696},{"alt":null,"id":21246325293133,"position":46,"preview_image":{"aspect_ratio":0.839,"height":828,"width":695,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-91.png?v=1637166800"},"aspect_ratio":0.839,"height":828,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-91.png?v=1637166800","width":695},{"alt":null,"id":21246325325901,"position":47,"preview_image":{"aspect_ratio":0.835,"height":834,"width":696,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-92.png?v=1637166796"},"aspect_ratio":0.835,"height":834,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0249\/4467\/2845\/products\/TempcoHi-DensityCartridgeHeaters-92.png?v=1637166796","width":696}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eStandard sheath material is 321 Stainless Steel which provides good thermal conductivity, and resistance to corrosion and scaling. Welded end disc made from the same material as the sheath provides a positive seal against moisture and other contaminants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eGrade “A” Nickel-Chrome resistance wire precisely wound on a high purity magnesium oxide core places the resistance wire as close to the inside of the sheath as possible. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eA high purity Magnesium Oxide (MgO) powder is used to fill all remaining space inside the sheath. Heater is then swaged, which compacts the magnesium oxide grains into a solid mass. The standard termination for is Type N, 10\" (254 mm) long nickel conductor lead wires externally connected to solid conductor terminal pins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003e\u003cem\u003ePerformance Ratings\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Temperature:\u003c\/strong\u003e 1400°F (760°C)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eMaximum Watt Density:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e100-300\u003c\/em\u003e\u003cem\u003e W\/in2 (15.5-46.5 W\/cm\u003csup\u003e2\u003c\/sup\u003e); Depending on heater size and operating temperature.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e The maximum operating temperature and the life expectancy of a cartridge heater is dependent on two main factors.\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003eThe maximum recommended sheath temperature (* 1200°F for a standard heater).\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eThe maximum ambient temperature for the termination selected.  Call us (844) 862-7880 if you require a recommendation for your application.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cem\u003eElectrical Ratings\u003c\/em\u003e\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Diameter\u003c\/th\u003e\n\u003cth\u003e1\/4\"\u003c\/th\u003e\n\u003cth\u003e5\/16\"\u003c\/th\u003e\n\u003cth\u003e3\/8\"\u003c\/th\u003e\n\u003cth\u003e1\/2\"\u003c\/th\u003e\n\u003cth\u003e5\/8\"\u003c\/th\u003e\n\u003cth\u003e3\/4\"\u003c\/th\u003e\n\u003cth\u003e1\"\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eMaximum Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e240\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e240\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e240\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e240\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e480*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e480*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e480*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Amperage (see next line for exceptions)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.4\u003c\/td\u003e\n\u003ctd\u003e4.5\u003c\/td\u003e\n\u003ctd\u003e6.7\u003c\/td\u003e\n\u003ctd\u003e10.5\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003ctd\u003e23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003e†Maximum Amperage for Types C1C, C1D, C2C, C2D, CS, F, M3, R1B, S1, S2, SA, W \u0026amp; W3 Terminations\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e5.5\u003c\/td\u003e\n\u003ctd\u003e7.6\u003c\/td\u003e\n\u003ctd\u003e9.7\u003c\/td\u003e\n\u003ctd\u003e9.7\u003c\/td\u003e\n\u003ctd\u003e9.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Wattage at 120V on a 1\" long Heater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003e45\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e50\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMinimum Wattage at 120V on a 2\" long Heater\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Wattage at 120V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e525\u003c\/td\u003e\n\u003ctd\u003e540\u003c\/td\u003e\n\u003ctd\u003e800\u003c\/td\u003e\n\u003ctd\u003e1260\u003c\/td\u003e\n\u003ctd\u003e2760\u003c\/td\u003e\n\u003ctd\u003e2760\u003c\/td\u003e\n\u003ctd\u003e2760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Wattage at 240V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1050\u003c\/td\u003e\n\u003ctd\u003e1080\u003c\/td\u003e\n\u003ctd\u003e1600\u003c\/td\u003e\n\u003ctd\u003e2520\u003c\/td\u003e\n\u003ctd\u003e5520\u003c\/td\u003e\n\u003ctd\u003e5520\u003c\/td\u003e\n\u003ctd\u003e5520\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Wattage at 480V\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003e11,000\u003c\/td\u003e\n\u003ctd\u003e11,000\u003c\/td\u003e\n\u003ctd\u003e11,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"text-align: center;\"\u003e\n\u003ctd\u003e\u003cstrong\u003eWattage Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"7\"\u003ePlus 5%, Minus 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eResistance Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" colspan=\"7\"\u003ePlus 10%, Minus 5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eDimensional Specifications\u003c\/em\u003e\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal Diameter\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e1\/4\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e5\/16\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e3\/8\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e1\/2\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e5\/8\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e3\/4\"\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e1\"\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003e(mm)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eActual Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.246\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-6.25\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.308\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-7.82\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.371\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-9.42\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.496\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-12.6\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0.621\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-15.77\u003c\/td\u003e\n\u003ctd\u003e0.746\u003c\/td\u003e\n\u003ctd\u003e-18.95\u003c\/td\u003e\n\u003ctd\u003e0.996\u003c\/td\u003e\n\u003ctd\u003e-25.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±.002\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-0.051\u003c\/td\u003e\n\u003ctd\u003e±.003\u003c\/td\u003e\n\u003ctd\u003e-0.076\u003c\/td\u003e\n\u003ctd\u003e±.003\u003c\/td\u003e\n\u003ctd\u003e-0.076\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eMinimum Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-25.4\u003c\/td\u003e\n\u003ctd\u003e1\/1\/04\u003c\/td\u003e\n\u003ctd\u003e-31.75\u003c\/td\u003e\n\u003ctd\u003e1\/3\/04\u003c\/td\u003e\n\u003ctd\u003e-44.45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eMaximum Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e36\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-914\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e36\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-914\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e48\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-1219\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e60\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-1524\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e72\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-1829\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003ctd\u003e-1829\u003c\/td\u003e\n\u003ctd\u003e72\u003c\/td\u003e\n\u003ctd\u003e-1829\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\" style=\"text-align: center;\"\u003e\u003cstrong\u003eLength Tolerance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e±3\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e(2.4)\u003c\/td\u003e\n\u003ctd\u003e±1\/8\u003c\/td\u003e\n\u003ctd\u003e(3.2)\u003c\/td\u003e\n\u003ctd\u003e±1\/8\u003c\/td\u003e\n\u003ctd\u003e(3.2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"14\" style=\"text-align: center;\"\u003eHeaters up to 5\" (127 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"center\" colspan=\"14\" style=\"text-align: center;\"\u003e±2% of Sheath Length Heaters over 5\" (127 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eCamber Tolerance Heaters up to 12\" (305 mm) long\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd align=\"center\" colspan=\"14\"\u003e0.010\"(.254 mm) per foot of length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eCamber Tolerance Heaters over 12\" (305 mm) long\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd align=\"center\" colspan=\"14\"\u003e0.020\"(.508 mm) per foot of length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eLength Tolerance\u003c\/em\u003e\u003c\/h4\u003e\n\u003ch4\u003e–\u003cem\u003e Lead Wires\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e– Wire Braid Leads\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e– Armor Cable Leads\u003c\/em\u003e\n\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eUp to 36\":\u003c\/strong\u003e -1\/2\", +1\" (-12.7 mm, +25.4 mm)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003e36\" to 72\":\u003c\/strong\u003e -1\", +2\" (25.4 mm, +50.8 mm)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eAbove 72\":\u003c\/strong\u003e ±4\" (101.6 mm)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote: \u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003eSpecifications detailed on this page are standard. Contact us (844) 862-7880 if your application requires tighter tolerances or has other special requirements.\u003c\/em\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eTemperature Coefficient of Resistance\u003c\/em\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan\u003eThe electrical resistance (ohms) of the heater resistance wire increases with temperature rise.  \u003c\/span\u003e\u003cspan\u003eTempco standard Hi-Density Cartridge Heaters are manufactured with ohms (cold ohms) 3.3% lower than the actual calculated ohms (hot ohms) to compensate for this increase.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cem\u003eAvailable Electrical Features\u003c\/em\u003e\u003c\/h4\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: center;\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eDual Volts\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003e3-Phase\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eDual  Circuits\u003c\/th\u003e\n\u003cth style=\"text-align: center;\"\u003eMultiple Heat Zones\u003cbr\u003e(maximum 3 zones)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\"\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eContact us (844) 862-7880 for maximum wattages and voltages.  \u003c\/em\u003e\u003cem\u003e* Heaters may require a larger diameter transition area at lead end.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eDesign Features:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2, 2-8, and 2-9 for Cartridge Heater Standard and Custom Features and Ordering information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-3 for Hi-Density Cartridge Heater category classification (Multi-Purpose Use - Highly Engineered Specific Purpose Usage) and ordering information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-4 for detailed performance and electrical specification information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-5 for detailed Watt Density specifications.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-6 for heater fitting and preventative contamination measures.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-6 for heater temperature control methods and excessive lead flexing preventative measures.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-7 for preventing excessive operating temperatures, and BNS Anti-Seize preventative measures.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-14 thru 2-23 for cartridge heater ordering information. \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTerminator Program\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eA select amount of heater specifications are available in our expedited shipping Terminator Program. Choose you\u003c\/em\u003er \u003cem\u003edesired shipping window and browse available selections below.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"177\" width=\"153\" alt=\"\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebTerminatorComboRev12-10.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebTerminatorComboRev12-10.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThese heaters are semi-finished (substrates), offering you the option to finish them by choosing from 19 program-qualified lead end terminations and options on select cartridge heater diameters. Cartridge heaters will be ready for shipment within 1 to 3 days, depending on the termination\/option selected.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eOrdering Information — Follow These Simple Steps\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cem\u003e1. Select a diameter available in the Terminator Program or refer to the Preconfigured Cartridge Heater Part Numbers:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e1\/4\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e5\/16\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e3\/8\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e1\/2\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e5\/8\"\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e3\/4\"\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e2. Chose a Program qualified Electrical Termination (required), Termination Option (optional) and Power Variation (optional).\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e3. Specify your lead requirements in the event that the standard supplied lengths for Plain Leads (10\"), Braid or Armor Cable (10\" over 12\" leads) are not suited for your application.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e4. Submit your order to us to place an order, or contact us at (844) 862-7880!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch6 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h6\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eTermination Location\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSingle-Ended Straight Termination\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003e \u003cimg height=\"164\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg?Small\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cem\u003eThe Electrical Termination is located at one end of the heater and exits straight out from the heater.\u003c\/em\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eSingle-Ended Right-Angle Termination\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 179px;\"\u003e\n\u003ctd style=\"text-align: center; height: 179px;\"\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC007.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC007.jpg\" width=\"223\" height=\"164\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18.1406px;\"\u003e\n\u003ctd style=\"height: 18.1406px;\"\u003e\u003cem\u003eThe Electrical Termination is located at one end of the heater and exits at a right angle from the heater.\u003c\/em\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eDouble-Ended Termination\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC017.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC017.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC017.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eEach end has one Electrical Termination.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eNot Available on 1\/8\" Cartridge Heaters.\u003c\/span\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eRequest Other Termination Location\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003eIf your filter selections do not return your desired results from our standard configurations, please continue to select your Specifications.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWhen you are finished, save your selections in the Wish List (using the button at the right of this page) and follow the steps to submit them to Industrial Heat Sources!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong data-mce-fragment=\"1\"\u003eElectrical Terminations\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType N: External Pins with Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 133px;\"\u003e\n\u003ctd style=\"text-align: center; height: 133px;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC091.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5156px;\"\u003e\n\u003ctd style=\"height: 19.5156px;\"\u003e\n\u003cp\u003e\u003cem\u003eStandard Termination for \u003cstrong\u003eHi-Density and Hi-Density Metric Cartridge Heaters\u003c\/strong\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFlexible stranded lead wires have fiberglass insulation and are connected to 1-1\/4\" (32 mm) long solid conductors. Silicone rubber coated fiberglass sleeving insulates the pin\/lead wire connection.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eNominal 3\/8\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-12 and 2-39 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType F: Internally Connected Flexible Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC002.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC002.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC002.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStandard Termination for \u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe fiberglass lead wires are internally connected to the terminal pins. This lead termination provides flexibility, permitting the lead wires to be sharply bent as they exit the heater.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating for HDC \u0026amp; HDM: 842°F (450°C).\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating for LDC: 482°F (250°C).\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eFor HDC \u0026amp; HDM heaters, leads longer than 60\" require a splice.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-39 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-22 for specific Cartridge Heater Ordering Information. \u003c\/em\u003e\u003cem\u003e \u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType M1: Polyolefin Liquid Barrier\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C601_M1_dim.jpg?Medium\" width=\"223\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C601_M1_dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA liquid barrier used for low temperature applications primarily in refrigeration or food service applications. The seal bonds to both the heater and the leads.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eThree conductor SJO type cord.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable only in certain diameters. Heaters smaller than 1\/2\" diameter require an adapter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-40 for additional \u003c\/em\u003e\u003cem\u003elead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType M2: Potted End Seal\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC092.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC092.jpg\" width=\"223\" height=\"165\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC092.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003ePotted end seals help to protect the heater from moisture or contamination from plastic material, cleaning solvents, or oils. The bottom end disc seal is welded in.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2A: Cement potting with silicone varnish. Fiberglass lead wires externally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2B: Silicone rubber potting. Silicone rubber lead wires internally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSilicone rubber potting temperature rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2C: High temperature epoxy potting. Teflon® lead wires internally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHigh temp. epoxy potting temp. rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2D: Low temperature epoxy potting. Teflon® lead wires internally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLow temp. epoxy potting temp. rating: 266°F (130°C), UL rated to 194°F (90°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eM2E: Cement potting with silicone varnish. Fiberglass lead wires internally connected.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (548°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum of 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e \u003cstrong\u003eM2A\u003c\/strong\u003e and \u003cstrong\u003eM2E\u003c\/strong\u003e are available through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-40 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType M3: \u003cspan\u003eTeflon® End Plug Seal\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC004.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC004.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC004.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStandard Termination for Hi-Density Miniature Cartridge Heaters.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA moisture resistant Teflon® seal that is swaged in during the manufacturing process with Teflon® insulated lead wire.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required for most heater sizes.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTeflon\u003csup\u003e®\u003c\/sup\u003e seal Temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire Temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads. Leads longer than 60\" require a splice.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-40 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType SA: Sealed Corrugated Armor Cable\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC076.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC076.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC076.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA liquid-proof stainless steel corrugated metal hose is silver brazed to the end of the cartridge heater. The end disc of the heater is also welded or brazed. This termination provides a positive seal against moisture and contamination entering the heater.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) cable over 12\" (305 mm) leads. Specify longer leads or cable.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-41 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information. \u003c\/em\u003e\u003cem\u003e \u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType S1: Flexible Spring\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 169px;\"\u003e\n\u003ctd style=\"text-align: center; height: 169px;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC005.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC005.jpg\" width=\"224\" height=\"165\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC005.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 134px;\"\u003e\n\u003ctd style=\"height: 134px;\"\u003e  \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C005_S1A_Fig1_Dim.jpg?Medium\" alt=\"Type S1 Fig. 1\" width=\"224\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C005_S1A_Fig1_Dim.jpg?Medium\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C006_S1A_Fig2_Dim.jpg?Medium\" alt=\"Type S1 Fig 2\" width=\"223\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C006_S1A_Fig2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 20.1719px;\"\u003e\n\u003ctd style=\"height: 20.1719px;\"\u003e\n\u003cp\u003e\u003cem\u003eThe leads are reinforced with a steel spring for applications with extreme flexing. The spring is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eS1A Mechanically fastened spring. S1B Silver brazed spring.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-41 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 514.594px;\" data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 457.594px;\" colspan=\"8\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions for Type S1\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 140px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 120px;\" colspan=\"2\" data-mce-fragment=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 24px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 70px;\" colspan=\"2\" data-mce-fragment=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth style=\"width: 103.594px;\" colspan=\"2\" data-mce-fragment=\"1\"\u003e“B” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 140px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 86px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 34px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 24px;\" data-mce-fragment=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 36px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 34px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 74.5938px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 140px; text-align: center;\" rowspan=\"7\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e13\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e20.64\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 140px; text-align: center;\" rowspan=\"9\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e13\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e20.64\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 86px; text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 24px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 36px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 34px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 74.5938px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType W: Wire Braided Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"158\" width=\"272\" alt=\"Type W Fig. 1\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C0010_W_Fig1_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C0010_W_Fig1_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eStainless steel braid over fiberglass leads offers sharp bending not possible with armor cable, as well as abrasion protection.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating for standard HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) braid over 12\" (305 mm) leads. Specify longer braid\/leads\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003e\u003cem\u003eSee reference pages 2-13 and 2-42 \u003c\/em\u003e\u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"7\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions for Type W\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth width=\"130\" colspan=\"2\" data-mce-fragment=\"1\"\u003e“A” Dim.\/HD\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“A” Dim.\/LD\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e*\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong\u003e* For Type W Miniature Cartridge Heater dimensions Call us at (844) 862-7880.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType W3: Swaged-In Wire Braided Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"202\" width=\"273\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC013.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC013.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC013.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStainless steel braid over fiberglass leads offers sharp bending not possible with armor cable, as well as abrasion protection. In addition, Type W3 offers contamination resistance due to the Teflon® seal required for holding the wire braid.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTeflon® Seal temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) braid over 12\" (305 mm) leads. Specify longer braid\/leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 2-42 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType CS: Straight Armor Cable Directly Attached to Sheath\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC012.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC012.jpg\" width=\"253\" height=\"186\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC012.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe armor cable is directly attached to the cartridge heater, eliminating the coupling, to maintain an overall diameter equal to or smaller than the cartridge diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHeaters with an OD of 3\/4\" or larger require reducing diameter washer.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) cable over 12\" (305 mm) leads. Specify longer leads or cable.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-43 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C1: Straight Armor Cable with Coupling\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C041_C1A_Fig1_Dim.jpg?Medium\" alt=\"Type C1 Fig. 1\" width=\"225\" height=\"131\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C041_C1A_Fig1_Dim.jpg?Medium\"\u003e\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C042_C1A_Fig2_Dim.jpg?Medium\" alt=\"Type C1 Fig. 2\" width=\"225\" height=\"131\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C042_C1A_Fig2_Dim.jpg?Medium\"\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eArmor cable provides the maximum in protection for abrasive, jagged environments. The coupling between the cartridge and the armor cable is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e* Limited to C1B: SS Cable, Mechanically Fastened for 1\/8\" Miniature Cartridge Heaters\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC1A: Galvanized armor cable, mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC1B: Stainless steel armor cable, mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC1C: Galvanized armor cable, silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC1D: Stainless steel armor cable, silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) cable over 12\" (305 mm) leads. Specify longer leads or cable.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-43 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable style=\"width: 474px;\" data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" style=\"width: 169px;\" data-mce-fragment=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 55px;\" data-mce-fragment=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 66px;\" data-mce-fragment=\"1\"\u003e“B” Dim.\u003c\/th\u003e\n\u003cth style=\"width: 40.3125px;\" data-mce-fragment=\"1\"\u003eCable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 126px;\" data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 16px;\" data-mce-fragment=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 39px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 40.3125px;\" data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29.6875px;\" data-mce-fragment=\"1\"\u003eDia.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"7\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e13\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e20.64\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"8\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e13\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e20.64\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 40.3125px; text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2­\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R1: Right-Angle Leads with Copper Elbow\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left;\"\u003e\n\u003cimg height=\"131\" width=\"225\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C014_R1A_Fig1_Dim.jpg?Medium\" alt=\"Type R1 Fig. 1\"\u003e\u003cimg height=\"131\" width=\"225\" alt=\"Type R1 Fig. 2\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C065_R1A_Fig2_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C065_R1A_Fig2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThis termination is used when space is limited. The copper elbow is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e R1A: Mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e R1B: Silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e Standard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e Standard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e R1A is available through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-44 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 474px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 474px;\" data-mce-selected=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" style=\"width: 169px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 169px;\" data-mce-selected=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 55px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 55px;\" data-mce-selected=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"3\" style=\"width: 66px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 66px;\"\u003e“B” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 126px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px;\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 16px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px;\" data-mce-selected=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 39px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px;\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29.6875px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px;\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"7\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px; text-align: center;\" data-mce-selected=\"1\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e44.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"10\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px; text-align: center;\" data-mce-selected=\"1\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e—\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e34.93­\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 12px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 8.17188px;\" data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R2: Right-Angle Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C044_R2A_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C044_R2A_Dim.jpg?Medium\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cp\u003e\u003cem\u003eThis termination is used when space is limited. Not suitable for abrasive environments. Same as C3 and W1 except plain leads. Various lead end finishes are available as listed below:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2A: Cement potting, no lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2B: Cement potting, welded lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2C: Silicone rubber potting, welded lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSilicone Rubber potting temperature rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard silicone rubber lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2D: High temperature epoxy potting, welded lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHigh Temperature epoxy potting temperature rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard Teflon® lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2E: Low temperature epoxy potting, welded lead end disc\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLow Temperature epoxy potting temperature rating: 266°F (130°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard Teflon® lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify other lead lengths.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eR2A and R2B are available through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-45 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable height=\"526\" style=\"width: 474px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 474px;\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" style=\"width: 169px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 169px;\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px;\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 55px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 55px;\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"3\" style=\"width: 66px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 66px;\"\u003e“B” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 126px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 126px;\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 16px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px;\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 39px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29.6875px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px;\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"7\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 126px; text-align: center;\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e44.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"9\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 126px; text-align: center;\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e—\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 16px; text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 39px; text-align: center;\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType S2: Right-Angle Spring\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cimg alt=\"Type S2 Fig. 1\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C007_S2A_Fig1_Dim.jpg?Medium\" width=\"223\" height=\"130\"\u003e  \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C008_S2A_Fig2_Dim.jpg?Medium\" alt=\"Type S2 Fig. 2\" width=\"224\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C008_S2A_Fig2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe leads are reinforced with a steel spring for applications with extreme flexing. The spring is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eS2A: Mechanically fastened spring\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eS2B: Silver brazed spring\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-45 for additional lead termination specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable height=\"526\" style=\"width: 474px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 474px;\" data-mce-selected=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" style=\"width: 169px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 169px;\" data-mce-selected=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" style=\"width: 55px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 55px;\" data-mce-selected=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"3\" style=\"width: 66px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 66px;\"\u003e“B” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth style=\"width: 126px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px;\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px;\" data-mce-selected=\"1\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 16px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px;\" data-mce-selected=\"1\"\u003eFig.\u003c\/th\u003e\n\u003cth style=\"width: 39px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px;\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 43px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px;\"\u003ein\u003c\/th\u003e\n\u003cth style=\"width: 23px;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px;\"\u003emm\u003c\/th\u003e\n\u003cth style=\"width: 29.6875px;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px;\"\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"7\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px; text-align: center;\" data-mce-selected=\"1\"\u003e\u003cstrong\u003eHi-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e44.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd rowspan=\"9\" style=\"width: 126px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 126px; text-align: center;\" data-mce-selected=\"1\"\u003e\u003cstrong\u003eLow-Density Cartridge Heaters\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e—\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e23.81\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e31.75\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 29.6875px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 29.6875px; text-align: center;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 43px; text-align: center;\" data-mce-selected=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"width: 16px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 16px; text-align: center;\" data-mce-selected=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 39px; text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"width: 39px; text-align: center;\" data-mce-selected=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"width: 43px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 43px; text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"width: 23px; text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\" data-mce-style=\"width: 23px; text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType W1: Right-Angle Wire Braided Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C056_W1A_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C056_W1A_Dim.jpg?Medium\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStainless steel braid over fiberglass leads for abrasion protection, mechanically crimped to the cartridge sheath at 90°. Wire braid offers extreme flexibility not possible with armor cable. Various lead end finishes are available as listed below.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eW1A: Cement potting and silicone varnish, no lead end disc.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eW1B: Welded lead end disc.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) braid over 12\" (305 mm) leads. Specify longer braid or leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-46 for additional termination recommendations.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"6\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDimensions for W1\u003c\/span\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth colspan=\"2\" width=\"130\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eAvailability\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eHD\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eLD\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cspan\u003e—\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e—\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e Yes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/16\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cspan\u003e7.94\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e Yes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e11.11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e14.29\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C2: Right-Angle Armor Cable with Copper Elbow\u003c\/h4\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: left;\" data-mce-fragment=\"1\"\u003e\n\u003cimg alt=\"Type C2 Fig. 1\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C055_C2A_Fig1_Dim.jpg?Medium\" width=\"224\" height=\"130\"\u003e   \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C015_C2A_Fig2_Dim.jpg?Medium\" alt=\"Type C2 Fig. 2\" width=\"224\" height=\"130\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C015_C2A_Fig2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cp\u003e\u003cem\u003eArmor cable provides the maximum in protection for abrasive, jagged environments. The copper elbow between the cartridge and the armor cable is mechanically fastened or silver brazed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2A: Galvanized armor cable, mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2B: Stainless steel armor cable, mechanically fastened\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2C: Galvanized armor cable, silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2D: Stainless steel armor cable, silver brazed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating for LDC:482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) cable over 12\" (305 mm) leads. Specify longer cable or leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC2A and C2B are available through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.\u003c\/em\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-47 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"8\"\u003eDimensions for Type C2 Hi-Density Cartridge Heaters\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eDiameter\u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“B” Dim.\u003c\/th\u003e\n\u003cth\u003eCable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003eFig.\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003eDia.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e44.45\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/8 \u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"8\"\u003eDimensions for Type C2 Low Density Cartridge Heaters\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eDiameter\u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“B” Dim.\u003c\/th\u003e\n\u003cth\u003eCable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003eFig.\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003eDia.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/8 \u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/8 \u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e28.58\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType C3: Right-Angle Armor Cable\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C045_C3A_Dim.jpg?Medium\" width=\"304\" height=\"177\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C045_C3A_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eUse this termination when space is limited and maximum protection is required. The armor cable is tack welded or silver brazed to the cartridge sheath at 90°. The sheath extension is potted with cement. Various lead end finishes are available as listed below.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC3A: Cement potting and silicone varnish with no lead end disc, galvanized cable\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC3B: Cement potting and silicone varnish with no lead end disc, stainless steel cable\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC3C: Welded lead end disc, with galvanized cable\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eC3D: Welded lead end disc, with stainless steel cable\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 3\/8\" up to 1\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard fiberglass lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) armor cable over 12\" (305 mm) leads. Specify longer cable or leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-13 and 2-47 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003eDiameter\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003eAvailability\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“A” Dim.\u003c\/th\u003e\n\u003cth colspan=\"2\" width=\"130\" data-mce-fragment=\"1\"\u003eArmor Cable\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eHD\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eLD\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003ein\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 4.76\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e—\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 6.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e 9.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e14.29\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e22.23\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e23.81\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e31.75\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eYes\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType T2: Screw Terminals\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C021_T2_Dim.jpg?Medium\" width=\"313\" height=\"182\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C021_T2_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor use with leads, crimp terminals, or bus bars. Includes washers and nuts.  Minimum 1\/2\" unheated section at the lead end is required.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eDiameters available:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHDC – 5\/8\", 3\/4\", 1\"\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHDM – 16 mm and 20 mm\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard: screw #8-32\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 48 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType B: Heat Resistant Ceramic Bead Insulation\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC023.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC023.jpg\" width=\"253\" height=\"187\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC023.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe ultimate in high temperature lead protection. Allows for the attachment of flexible leads to the heater away from the high heat area. Used when the ambient temperature exceeds 842°F (450°C).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) solid nickel pins insulated with ball and socket construction type ceramic beads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-48 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType BL: Heat Resistant Ceramic Bead Insulation with Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC603.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC603.jpg\" width=\"233\" height=\"172\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC603.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"item\"\u003e\n\u003cdiv class=\"otherStuff\"\u003e\n\u003cdiv id=\"FullDetailsHolder_8114\" class=\"FullDetailsHolder\"\u003e\n\u003cdiv class=\"DataDetail New100 CenterZone TitanBlock\" blockinfo=\"DataDetail New100 CenterZone TitanBlock\"\u003e\n\u003cdiv class=\"oneDetail\"\u003e\n\u003cdiv class=\"item\"\u003e\n\u003cdiv class=\"MainContent\"\u003e\n\u003cem\u003eHigh temperature flexible leads are connected away from the high heat area.\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"MainContent\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 6\" (254 mm) solid nickel pins insulated with ball and socket construction type ceramic beads and 10\" (254 mm) fiberglass leads rated at 842°F (450°C). Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-12 and 2-48 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType T4: Double-End Terminal Pin\u003c\/h4\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C017_T4A_Dim.jpg?Medium\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor those applications in which wiring from both ends is an advantage. Various seals are available:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eT4A: Cement potting seal with silicone varnish\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (538°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eT4B: High temp. moisture resistant epoxy seal\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHigh temp. epoxy temp. rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eT4C: Low temp. moisture resistant epoxy seal\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLow temp. epoxy temp. rating: 266°F (130°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 1\" unheated section at each end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003cem\u003eStandard terminal pin length is 2\".\u003c\/em\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 49 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType F1: Double-End Flexible Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC016.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC016.jpg\" width=\"223\" height=\"164\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC016.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor applications in which it is an advantage to wire from both ends. The leads are internally connected and can be bent sharply as they exit the potted ends. Various seals are available:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eF1A: Fiberglass leads with cement potting seal and silicone varnish\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCement potting temperature rating: 1000°F (532°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 482°F (250°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eF1B: Teflon® leads with high temp. moisture resistant epoxy seal\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eHigh temp. epoxy temperature rating: 450°F (232°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eF1C: Teflon® leads with low temp. moisture resistant epoxy seal\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLow temp. epoxy temperature rating: 266°F (130°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard lead wire temperature rating: 392°F (200°C)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 1\" unheated section at each end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eLeads longer than 60\" require a splice.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 49 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e \u003cem\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/em\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType T3: Double-End Screw Terminal Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C022_T3_Dim.jpg?Medium\" width=\"294\" height=\"171\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C022_T3_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eA Double-Ended heater with quick change wiring screw terminals. Includes zinc plated washers and nuts.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum 1\/2\" unheated section at each end is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard screw sizes:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e1\/2\" diameter – #8-32 × 3\/4\" screws\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e5\/8\" to 1-1\/4\" diameter – #10-32 × 3\/4\" screws\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference page 49 \u003c\/em\u003e\u003cem\u003efor additional lead termination specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTermination Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType S3: Lead Wire Strain Relief\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 464px;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C009_S3_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C009_S3_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 464px;\"\u003e\n\u003cp\u003e\u003cem\u003eStrain relief clip for leads subject to tension and stress. A “T” type strain relief is silver brazed to the sheath.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-52 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional strain relief specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType S4: Right-Angle Lead Wire Strain Relief\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"193\" width=\"332\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C064_S4_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C064_S4_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStrain relief clip for leads subject to tension and stress. A “T” type strain relief is silver brazed to the sheath and bent at a 90° angle.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-52 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional strain relief specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTerminal Box Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E1: General Purpose Terminal Box\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e        \u003cimg height=\"164\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC599.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC599.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC599.jpg?Small\"\u003e       \u003cimg height=\"133\" width=\"152\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C600_E1_BoxOnly_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C600_E1_BoxOnly_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eGeneral purpose Stainless Steel NEMA 1 electrical enclosure designed to provide protection from electrical shock. The boxes have a 5\/8\" conduit knockout and are welded or brazed to the cartridge sheath.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eA termination must be specified separately.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program For 2nd or 3rd Day Shipping.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003ePlease contact us at (844) 862-7880 should you have any questions or need additional information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eSee reference pages 2-13 and 2-54 \u003c\/em\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E2: Moisture Proof Terminal Box\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e       \u003cimg height=\"164\" width=\"222\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC070.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC070.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC070.jpg?Small\"\u003e     \u003cimg height=\"134\" width=\"153\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C604_E2_BoxOnly_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C604_E2_BoxOnly_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eNEMA 4 aluminum electrical enclosures provide protection from splashing or hose directed water, external condensation and water seepage. The box is mechanically attached to the cartridge sheath.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA single 5\/8\" access hole is standard.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA termination must be specified separately.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003e\u003cem\u003eSee reference page 2-54 \u003c\/em\u003e\u003c\/em\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E3: Explosion Resistant Terminal Boxes\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg height=\"186\" width=\"253\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC562.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC562.jpg\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eGeneral purpose Stainless Steel NEMA 1 electrical enclosure designed to provide protection from electrical shock. The box is welded or brazed to the cartridge sheath.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-55 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A termination must be specified separately.\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"7\"\u003eHousing E3C Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater\u003c\/th\u003e\n\u003cth\u003eHub Size\u003c\/th\u003e\n\u003cth\u003e“A”\u003c\/th\u003e\n\u003cth\u003e“B”\u003c\/th\u003e\n\u003cth\u003e“C”\u003c\/th\u003e\n\u003cth\u003e“D”\u003c\/th\u003e\n\u003cth\u003e“E”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter(s)\u003c\/th\u003e\n\u003cth\u003eNPT\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/2 \u0026amp; 5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"7\"\u003eHousing E3D Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater\u003c\/th\u003e\n\u003cth\u003eHub Size\u003c\/th\u003e\n\u003cth\u003e“A”\u003c\/th\u003e\n\u003cth\u003e“B”\u003c\/th\u003e\n\u003cth\u003e“C”\u003c\/th\u003e\n\u003cth\u003e“D”\u003c\/th\u003e\n\u003cth\u003e“E”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter(s)\u003c\/th\u003e\n\u003cth\u003eNPT\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/2 \u0026amp; 5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"7\"\u003eHousing E3L Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater\u003c\/th\u003e\n\u003cth\u003eHub Size\u003c\/th\u003e\n\u003cth\u003e“A”\u003c\/th\u003e\n\u003cth\u003e“B”\u003c\/th\u003e\n\u003cth\u003e“C”\u003c\/th\u003e\n\u003cth\u003e“D”\u003c\/th\u003e\n\u003cth\u003e“E”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter(s)\u003c\/th\u003e\n\u003cth\u003eNPT\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/2 \u0026amp; 5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e2-3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e Explosion resistant terminal housings are intended to provide containment of anexplosion in the enclosure only. No portion of the heater assembly outside the enclosure  is covered under this NEMA rating. Abnormal use of a heater which results in excessive temperature can create hazardous conditions such as a fire. Never perform any type of service or remove the housing cover prior to disconnecting all electrical power to the heater.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003cem\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E4: General Purpose Terminal Box (Mailbox Style)\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e        \u003cimg height=\"186\" width=\"252\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC566Rev.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC566Rev.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC566Rev.jpg?Small\"\u003e \u003cimg height=\"134\" width=\"153\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C564_E4_BoxOnly_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C564_E4_BoxOnly_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eGeneral purpose steel NEMA 1 electrical enclosure designed to provide protection from electrical shock. The box is welded to the cartridge sheath.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003eA termination must be specified separately.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-54 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType E5: Octagon Terminal Box\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e       \u003cimg height=\"127\" width=\"172\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC608.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC608.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC608.jpg?Small\"\u003e                  \u003cimg height=\"142\" width=\"162\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C609_E5_BoxOnly_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C609_E5_BoxOnly_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eNEMA 4\/7 electrical enclosures provide protection from contaminants, moisture, and hazardous conditions. These housings are screwed onto a heater with a single or double ended Brass or Stainless Steel fitting.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA threaded fitting mounting termination must be specified. See reference pages 2-50 and 2-51.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eOther terminal box configurations available upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-54 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional terminal box specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLead End Connection Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType RT: Ring Terminal\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"157\" width=\"213\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC095.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC095.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC095.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eVarious types of crimp terminals can be attached to the heater leads to make wiring into applications quick and easy. Non-insulated and insulated with nylon (221°F\/105°C) or PVC (194°F\/90°C).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead end connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType ST: Ring Terminal\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg height=\"164\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC098.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC098.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC098.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eVarious types of crimp terminals can be attached to the heater leads to make wiring into applications quick and easy. Non-insulated and insulated with nylon (221°F\/105°C) or PVC (194°F\/90°C).\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead end connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType QTA: 1\/4\" Female Straight Quick Disconnect\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"164\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC094.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC094.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC094.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eVarious types of crimp terminals can be attached to the heater leads to make wiring into applications quick and easy. Non-insulated and insulated with nylon (221°F\/105°C) or PVC (194°F\/90°C).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead end connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType QTA: 1\/4\" Female Right-Angle Quick Disconnect\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"165\" width=\"223\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC093.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC093.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC093.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eVarious types of crimp terminals can be attached to the heater leads to make wiring into applications quick and easy. Non-insulated and insulated with nylon (221°F\/105°C) or PVC (194°F\/90°C).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead end connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType P: Quick Disconnect Plugs\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"193\" width=\"193\" alt=\"\/Tempco\/Data-Assets\/15-Accessories-Images\/WebT123.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/15-Accessories-Images\/WebT123.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/15-Accessories-Images\/WebT123.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eAllows for the quick and easy replacement of the heater. The plug can be attached to galvanized armor cable, stainless steel armor cable, or wire braid.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-12 and 2-56 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire connection specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLead Wire Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType MIL: High Temperature Lead Wire\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: left;\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003eWhen required, high temperature lead wire can be used on most cartridge heaters. The stranded wire is insulated with mica tapes and then a treated fiberglass overbraid.\u003c\/em\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eMaximum temperature rating: 450°C (842°F)\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TL: Teflon® Leads\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e \u003cem\u003eMaximum temperature rating: 200°C (392°F)\u003c\/em\u003e\u003cem style=\"font-size: 1.4em;\"\u003e \u003c\/em\u003e \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType HA: Heat Shrink covered Armor Cables\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eEither the galvanized or stainless steel armor cable can be covered with moisture proof heat shrink PVC tubing.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType HTL: Very High Temperature Lead Wire\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003eWhen required, high temperature lead wire can be used on most cartridge heaters. The stranded wire is insulated with mica composite and then a treated fiberglass overbraid.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable wire gauge sizes: 10-18\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMaximum temperature rating: 550°C (1022°F)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType SR: Silicone Rubber Coated Fiberglass Sleeving\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003eFor added protection, strength, and resistance to various chemicals, the lead wires can be covered with silicone rubber sleeving.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSRA Silicone rubber coated fiberglass sleeving on each lead separately\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSRB Silicone rubber coated fiberglass sleeving on both leads together\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSpecify length when ordering.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMaximum temperature rating: 200°C (392°F)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003c\/em\u003e\u003cstrong\u003e\u003cem\u003efor additional lead wire specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSheath Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType CM: Single Threaded Fitting\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e        \u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"146\" width=\"253\" alt=\"Type CM Fig. 1 - Fitting Flush with Lead End of Sheath\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C030_CMA_Fig1_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C030_CMA_Fig1_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" height=\"146\" width=\"252\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C030b_CMV_Fig2_Dim.jpg?Medium\" alt=\"Type CM Fig. 2 - Fitting offset from Lead End of Sheath\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cspan\u003eType CM Fig. 1 - Fitting Flush with Lead End of Sheath\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cspan\u003eType CM Fig. 2 - Fitting offset from Lead End of Sheath\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003eCMA\/CMN:\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cem\u003e Low temperature epoxy potting — 266°F (130°C), UL rated to 194°F (90°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMB\/CMP:\u003c\/strong\u003e Hi-temp cement potting with silicone varnish — 1000°F (538°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eFiberglass leads internally connected, rated 482°F (250°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMC\/CMQ:\u003c\/strong\u003e Silicone rubber potting — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eSilicone rubber leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMD\/CMR:\u003c\/strong\u003e High temperature epoxy potting — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMV:\u003c\/strong\u003e Brass Fitting\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMW:\u003c\/strong\u003e Stainless Steel Fitting\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA minimum of 1\/4\" cold section below the bushing is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSpecify offset dimension \"E\" when ordering.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA termination must be specified separately.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCMB\u003c\/strong\u003e \u0026amp; \u003cstrong\u003eCMP\u003c\/strong\u003e are available through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-50 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-23 for Hi-Density Cartridge Immersion Heater specifically designed for Heating Water and Other Liquids.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"5\" data-mce-fragment=\"1\"\u003eStandard NPT Bushing Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"5\" data-mce-fragment=\"1\"\u003e(Fig. 1 \u0026amp; Fig. 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003eHeater Diameter\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eNPT\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003e(in)\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eSize\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e“A”\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e“B”\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003e“C”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1⁄8-27\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1⁄4-18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1\/2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3⁄8-18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1⁄2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3⁄4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e11⁄4-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"3\" data-mce-fragment=\"1\"\u003eType Codes for Single Threaded Fittings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003eFitting Material\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003ePotting Seal Type\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eBrass\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\"\u003eStainless Steel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eLow Temp Epoxy\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMA\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eHi-Temp Cement\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMB\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eSilicone Rubber\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMC\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMQ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eHi-Temp Epoxy\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMD\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fitting can be offset from end of sheath. See Figure 2.\u003c\/em\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType CN: Double Threaded Fitting\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C029_CNA_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C029_CNA_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003ePotted end seals help to protect the heater from moisture or contamination from plastic material, cleaning solvents, or oils. The bushing cavity can be sealed with various materials such as:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCNA\/CNN:\u003c\/strong\u003e Low temperature epoxy potting — 266°F (130°C), UL rated to 194°F (90°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCNB\/CNP:\u003c\/strong\u003e Hi-temp cement potting w\/ silicone varnish — 1000°F (538°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eFiberglass leads internally connected, rated 482°F (250°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCNC\/CNQ:\u003c\/strong\u003e Silicone rubber potting — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eSilicone rubber leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eCND\/CNR:\u003c\/strong\u003e High temperature epoxy potting — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA minimum of 1\/4\" cold section below the bushing is required.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eA termination must be specified separately\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 51 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-23 for Hi-Density Cartridge Immersion Heater specifically designed for Heating Water and Other Liquids.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"5\"\u003eStandard NPT Bushing Dimensions\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeater Diameter\u003c\/th\u003e\n\u003cth\u003eNPT\u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e(in)\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e“A”\u003c\/th\u003e\n\u003cth\u003e“B”\u003c\/th\u003e\n\u003cth\u003e“C”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1⁄8-27\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1⁄4-18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e9\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\/2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3⁄8-18\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11\/16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e5\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1⁄2-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e3\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3⁄4-14\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-1\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e7\/8\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003e1-1\/4\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11⁄4-111⁄2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1-3\/4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"3\"\u003eType Codes for Double Threaded Fittings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eFitting Material\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePotting Seal Type\u003c\/th\u003e\n\u003cth\u003eBrass\u003c\/th\u003e\n\u003cth\u003eStainless Steel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eLow Temp Epoxy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNA\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eHi-Temp Cement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNB\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eSilicone Rubber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNC\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNQ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eHi-Temp Epoxy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCND\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eCNR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TH: Top Hat Screw Plug\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/TopHatSide_TH_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/TopHatSide_TH_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eLow temperature epoxy potting — 266°F (130°C), UL rated to 194°F (90°C)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-51 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType BF: Bulkhead Fitting\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC026.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC026.jpg?Small\" width=\"252\" height=\"186\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eA 5\/8-18 UNF fitting is attached to the end of the cartridge heater to allow for mounting the heater to the wall of a tank or enclosure. Brass fittings are silver brazed and stainless steel fittings are heli-arc welded. Includes a copper washer and jam nut. The lead wires are internally connected. Available with the potting seals listed in the table.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePotted end seals help to protect the heater from moisture or contamination from plastic material, cleaning solvents, or oils. The fitting cavity can be sealed with various materials such as:\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBFA\/BFJ Low temperature epoxy potting\u003c\/strong\u003e — 266°F (130°C), UL rated to 194°F (90°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBFB\/BFK Silicone rubber potting\u003c\/strong\u003e — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eSilicone rubber leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBFC\/BFL High temperature epoxy potting\u003c\/strong\u003e — 450°F (232°C)\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTeflon® leads internally connected, rated 392°F (200°C).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A minimum of 1\/4\" cold section below the bushing is required.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eStandard 10\" (254 mm) leads. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-51 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"3\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eType Codes for Bulkhead Fittings\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e \u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eFitting Material\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003ePotting Seal Type\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBrass\u003c\/th\u003e\n\u003cth data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eStainless Steel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLow Temp Epoxy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFA\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSilicone Rubber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFB\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHi-Temp Epoxy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFC\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-selected=\"1\"\u003eBFL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType MFR: Mounting Flange\/Round\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC025.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC025.jpg\" width=\"257\" height=\"189\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC025.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eRecommended for applications where excessive vibration exists and may cause the heater to back out of its mounting hole. The 16 ga. 304 SS flange is used as a means of securing the cartridge heater in place. The default position of the flange is flush with the lead end. Specify the position of the flange when ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping with flush flange only\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eCustom Mounting Flanges available upon request. Consult us with your requirements (844) 862-7880.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-13 and 2-52 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003cthead data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth colspan=\"7\" data-mce-fragment=\"1\"\u003eStandard Round Mounting Flanges\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003cth data-mce-fragment=\"1\"\u003eHeater Diameters\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“F”\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“C”\u003c\/th\u003e\n\u003cth colspan=\"2\" data-mce-fragment=\"1\"\u003e“H”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4 (6.35), 5\/16 (7.94), 3\/8 (9.53), 1\/2 (12.70), 5\/8 (15.88), 3\/4 (19.05)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e38.10\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e28.57\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e.156\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3.97\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8 (22.23), 1 (25.40),1-1\/4 (31.80)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e50.80\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e41.28\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e.203\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5.16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType MFH: Mounting Flange\/Hexagon\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"202\" width=\"274\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC068.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC068.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC068.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA hex shape allows the possibility of using a wrench when removal is tight. The 16 gage. 304 SS flange is used as a means of securing the cartridge heater in place. The default position of the flange is flush with the lead end. Specify the position of the flange when ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eCustom Mounting Flanges available upon request. Consult us with your requirements (844) 862-7880.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-52 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eStandard Hex Mounting Flanges\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eHeater   Diameter\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e“F”\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e“C”\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e“H”\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable width=\"100%\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003emm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003emm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003emm\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003emm\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.144\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3.66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7.94\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e25.40\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3\/4\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.144\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3.66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e25.40\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3\/4\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e19.05\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.144\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e3.66\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e34.93\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-5\/32\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e29.37\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.187\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e4.76\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-5\/32\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e29.37\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.187\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e4.76\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e34.93\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-5\/32\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e29.37\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.187\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e4.76\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e22.26\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-7\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e47.63\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-9\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e39.69\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.203\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e5.16\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-7\/8\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e47.63\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-9\/16\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e39.69\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.203\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e5.16\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e31.80\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-7\/8\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e47.63\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e1-11\/16\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e42.86\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e.203\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cspan\u003e5.16\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R3: Angled Sheath Extension\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"188\" width=\"324\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C018_R3_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C018_R3_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe sheath extension is silver brazed to the cartridge at a 90° angle. The leads are internally connected. The standard sheath extension is 3\/8\" long. Specify when ordering if a longer sheath extension is required. If abrasion resistance is required, armor cable or stainless steel wire braid can be attached to the sheath extension. Available with various lead wire types and potted end seals.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping (cement potting only)\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R4: Bent Cartridge\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"188\" width=\"323\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C019_R4_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C019_R4_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe heater sheath itself is bent to 90°. The bend is through a required unheated section. The standard sheath extension past the bend is 1\". Specify when ordering if a longer sheath is required.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e Cartridge Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003ein\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003emm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e6.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e9.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e15.88\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e19.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e25.40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003eBend Radius\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e19.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e25.40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1-1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e31.75\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center; width: 27%;\"\u003e\u003cstrong\u003e\"          \"\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 19.8463%;\"\u003e1-1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center; width: 20.1537%;\"\u003e38.10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eConsult us (844) 862-7880 for Miniature Cartridge Heater Bend Radius details.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType R5: Square Block with Tube Extension\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"187\" width=\"322\" alt=\"Type R5\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/R5_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/R5_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe tube extension is silver brazed or tack welded to a square S\/S block. The standard tube length is 1\", but different lengths can be specified. Available with various lead wire types, abrasion resistant options or potted end seals.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference page 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\"\u003eHeater Diameter\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“A”\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003e“B”\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003cth\u003ein\u003c\/th\u003e\n\u003cth\u003emm\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e6.35\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11.11\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e7.94\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e9.53\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e9.52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.87\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\/2\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e12.70\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.88\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e5\/8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e15.87\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e3\/4\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e19.05\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e1\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e25.40\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e11\/16\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e17.46\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType LR: Locating Ring\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"206\" width=\"354\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C069_LR_Dim.jpg?Medium\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/C069_LR_Dim.jpg?Medium\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA locating ring can be attached to the heater to aid in positioning the heater for the application. The default position of the ring is 1\/4\" from the lead end. Specify the position of the ring when ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping!\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-12 and 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType PS: Pull Strap\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg height=\"252\" width=\"342\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC011.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC011.jpg?Small\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC011.jpg?Small\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eA nickel wire rope is silver brazed to the lead end of the cartridge heater sheath to assist in removing the heater.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eIn stock and available through the Hi-Density Cartridge Heater Terminator Program.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-12 and 2-53 \u003c\/em\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003efor additional sheath specifications and information.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType IS: Incolony Sheath\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003eThe standard sheath material for all Hi-Density Cartridge Heaters except 1\" diameter is 321 stainless steel; standard for 1\" diameter is 304 stainless steel. The Incoloy Sheath option is available on all diameters except 1\/8\", 5\/16\", 8 mm and 20 mm.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem\u003eTo assist you in selecting the proper sheath material, corrosion resistant ratings and chemical properties of various heater sheath materials are given in the Engineering Section of the site.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType DSM: Other Special Sheath Materials\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eIf your application requires a specific alloy sheath material, consult IHS at (844) 862-7880 with your requirements. \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 \u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003e\u003cstrong\u003efor additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType PAS: Passivation\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003ePassivating is a chemical process accomplished by dipping the heater in a solution of nitric acid. The process removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference page 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType OAL: Special Length Tolerances\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003eIf a special length tolerance different than the standard length tolerance specified on reference pages 2, 3, and 4 is required, then consult IHS at (844) 862-7880 with your requirements.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType ELP: Electro-Polish\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003eElectro-Polishing is an electro-chemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the heater sheath.\u003c\/em\u003e\u003c\/span\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType CG: Centerless Grinding\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor applications requiring high precision fit and tolerance, the sheath can be centerless ground. Tolerance: ±0.0005 inches (0.013 mm) Specify diameter when ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-57 for additional sheath specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSensor Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ1 and TK1: Grounded at Disc End\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC049.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC049.jpg?Small\" width=\"264\" height=\"194\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe thermocouple junction is grounded to the sheath at the disc end and packed with MgO. The concave end disc is filled with silver solder and ground flat. When inserted into a flat end blind hole, it will provide fast responsive temperature readings. Widely used in Hot Runner mold probes.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTJ1 Type J thermocouple\u003c\/em\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK1 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information..\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003e\u003cstrong\u003eANSI Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eK\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003eFor additional thermocouple types, consult IHS at (844) 862-7880.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ2 and TK2: Ungrounded at Disc End\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC050.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC050.jpg\" width=\"264\" height=\"195\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC050.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe thermocouple junction is ungrounded, located at the end of the heater section, 1\/8\" behind the end disc and packed with MgO. Only provides reference temperature reading of the part being heated – slower response.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eTJ2 Type J thermocouple\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK2 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003e\u003cstrong\u003eANSI Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eK\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003eFor additional  thermocouple types, consult IHS at (844) 862-7880.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ3 and TK3: Ungrounded at Center\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC051.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC051.jpg?Small\" width=\"304\" height=\"224\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe thermocouple junction is ungrounded and is located in the center of the length and diameter of the cartridge heater. It provides internal temperature readings of the heater core. Generally used for research applications and is not recommended for controlling process temperatures.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTJ3 Type J thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK3 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003eANSI Code\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eJ\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eK\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003eFor additional thermocouple types, consult IHS at (844) 862-7880.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ4 and TK4: Grounded at Center\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC052.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC052.jpg\" width=\"323\" height=\"238\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC052.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eThe thermocouple junction is grounded to the sheath in a 1\/2\" unheated section located in the center of the cartridge length unless otherwise specified. It provides good temperature readings with quick response.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTJ4 Type J thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK4 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003e\u003cstrong\u003eANSI Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePositive\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eK\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003eFor additional thermocouple types, consult IHS at (844) 862-7880.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TJ5 and TK5: Grounded at Lead End\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cimg alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC053.jpg\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC053.jpg?Small\" width=\"323\" height=\"238\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThe thermocouple junction is grounded to the sheath at the lead end. A minimum of 3\/8\" of cold section is required. It provides good temperature readings with quick response.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTJ5 Type J thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eTK5 Type K thermocouple\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eMinimum sheath length: 3\" for 1\/4\", 3\/8\" and 1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003e10\" leads are standard for both heater and thermocouple. Leads are internally connected. Specify longer leads.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e For a complete selection of standard heaters with built-in Type J thermocouple for Hot Runner, please see the Pennybottom Cartridge Heater Section.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference pages 2-24 and 2-25 for the Hi-Density Pennybottom Cartridge Heater additional thermocouple control specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-58 for additional thermocouple control recommendations.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\" rowspan=\"2\"\u003e\u003cstrong\u003eANSI Code\u003c\/strong\u003e\u003c\/td\u003e\n\u003cth colspan=\"2\"\u003eConductor Characteristics\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eTemperature Ranged\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePostivie\u003c\/th\u003e\n\u003cth\u003eNegative\u003c\/th\u003e\n\u003cth\u003e°F\u003c\/th\u003e\n\u003cth\u003e°C\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eIron (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eConstantan (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 1400\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eK\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eChrome (Non-Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eAlumel (Magnetic)\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e0 to 2300\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e-17 to 1260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"5\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eFor additional thermocouple types, consult IHS at (844) 862-7880.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Minimum sheath length: 3\" for 1\/4\", 3\/8\" and1\/2\" diameter. 4\" for 5\/8\" and 3\/4\" diameter.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInternal Power Variations\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType DW: Distributed Wattage\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC072.jpg?Small\" alt=\"\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC072.jpg\" width=\"323\" height=\"238\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebC072.jpg?Small\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eCartridge heaters can be designed to vary the wattage along the length of the heater. Specify number of zones and the required watts and length per zone starting from the disk end. Leads can be connected externally or internally. Picture shows a heater with Type N externally connected leads. Heaters with other terminations may require a longer cold section at the lead end.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType 3PH: Three Phase\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg height=\"293\" width=\"293\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD10.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD10.jpg\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eIn order to minimize the gauge of the wiring on high wattage cartridge heaters, 3-phase elements can be designed.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType DV: Dual Voltage\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cimg height=\"293\" width=\"293\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD20.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD20.jpg\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003e3\/8\" and 1\/2\" diameter heaters may require a larger diameter transition area at lead end. Cartridge heaters can be designed using 3-wire series\/parallel circuits for dual voltage applications. Whether the heater is run on the high or low voltage, the wattage will be the same. DV1 120\/240 volts DV2 240\/480 volts.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType DWV: Dual Circuits\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg height=\"293\" width=\"293\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD40.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD40.jpg\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eIndependent resistance elements can be designed in a single cartridge heater for added versatility.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType MHZ: Multiple Heat Zones\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\u003cem\u003e\u003cimg height=\"292\" width=\"292\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD30.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD30.jpg\"\u003e \u003c\/em\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003e3\/8\" and 1\/2\" diameter heaters may require a larger diameter transition area at lead end. Multiple independently operated sections of the heater with a common wiring connection can be designed for increased flexibility.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType GJ: Grounded Element Winding\u003c\/h4\u003e\n\u003ctable width=\"363\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 202.047px;\"\u003e\n\u003ctd style=\"text-align: center; width: 464px; height: 202.047px;\"\u003e\n\u003cimg height=\"293\" width=\"293\" src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD60.jpg\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD60.jpg\"\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"width: 464px; height: 10px;\"\u003e\n\u003cp\u003e\u003cem\u003eFor DC applications where the electrical circuit is negative grounded, the cartridge heater can be designed with one side of the element winding grounded to the sheath and a single lead wire exiting the cartridge heater.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType GL: Grounded Lead\/Sheath\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e \u003cimg src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD50.jpg\" width=\"363\" height=\"363\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.tempco.com\/Tempco\/Data-Assets\/02-Cartridge-Images\/WebLD50.jpg\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eFor those applications requiring a separate ground lead attached to the cartridge heater sheath. Standard ground lead wire is a 10\" long insulated stranded conductor. Optional insulated and color coded leads are available.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003eAvailable through the Hi-Density Cartridge Heater Terminator Program for 2nd Day Delivery.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-59 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAdditional Options\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TF: Thermal Fuses\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eThermal fuses can be built into cartridge heaters to act as a high limit for the heater in applications where the temperature must be limited to avoid dangerous situations. When the trigger point is reached, the thermal fuse will open, cutting the electrical current to the cartridge heater. Once the thermal fuse opens, it cannot be reset. Many different trigger temperatures are available.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TS: Thermostat\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003eCartridge heaters with built-in thermostats are very efficient and economical for heating and controlling temperatures. Available with NPT or special type mounting fittings, they provide a self-contained heater mainly recommended for immersion applications. They can also be used as over-temperature safety devices. \u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe thermostats are factory preset for the trip temperature; therefore, prototyping and testing is required to determine the exact fixed setpoint. Maximum temperature—302°F (150°C). Maximum Amps—8@120 Volts. A minimum 2-1\/2\" cold section is required to house the thermostat. Consult Tempco with your requirements. \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType TM: Thermistor\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eTempco has the ability to custom design cartridge heaters with built-in temperature sensors such as thermistors and RTDs. For specific applications that have a limited or single set point range, thermistors or RTDs in conjunction with simple electronic controllers can be an economical choice. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For thermocouples see reference page 2-58. \u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eType RD: RTD Temperature Sensor\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eTempco has the ability to custom design cartridge heaters with built-in temperature sensors such as thermistors and RTDs. For specific applications that have a limited or single set point range, thermistors or RTDs in conjunction with simple electronic controllers can be an economical choice. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e For thermocouples see reference page 2-58.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem data-mce-fragment=\"1\"\u003eSee reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for power variation specifications and information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cem\u003eSee reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  \u003c\/em\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eStandard Electrical Tests \u0026amp; Optional Test Reports\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eStandard Electrical Tests and Optional Test Reports\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e1. Resistance test — measures ohms at room temperature.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e2. IR (insulation resistance) test — measures the insulation resistance to the flow of current. Standard test is done at 500VDC.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e3. Hipot (high potential) test — a high voltage is applied between a product's current carrying conductors and its metallic enclosure to verify that the insulation is sufficient to protect the operator from electrical shock.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e4. Leakage current test — measures the current that flows from any conductive part to ground.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e5. Heaters can be serialized and test reports can be sent with each shipment if required. Contact IHS with your requirements at (844) 862-7880.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for Inspection Services and Test Report information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eDie Penetrant Test\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eThis non-destructive testing can detect imperfections in weld joints. For critical applications, each individual heater’s weld joints by end cap and fittings can be tested. Certified test reports will be sent with each shipment. Consult IHS for details (844) 862-7880.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for Inspection Services and Test Report information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eHydrostatic Pressure Test\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cem\u003eCartridge heaters with attached pipe fittings can be pressure tested to your specifications at Tempco. Our in-house testing capabilities can ensure that your products meet your exact specifications. Contact IHS with your requirements at (844) 862-7880.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\u003cstrong\u003eSee reference page 2-60 for Inspection Services and Test Report information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTypical Applications\u003c\/strong\u003e\u003c\/em\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlastic Extruders\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHot Runner Molds\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHot Stamping\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMedical Equipment\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePackaging Equipment\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMolds\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eAerospace\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSealing Bags\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSemiconductor\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlastic Molding\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShoe Machinery\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFood Processing\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHeating Gases and Liquids\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eGlue Guns\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLaminating Presses\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlatens\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScientific Equipment\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFood Service Equipment\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"scrollTable\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e"}

Tempco Hi-Density Cartridge Heaters

Product Description

Standard sheath material is 321 Stainless Steel which provides good thermal conductivity, and resistance to corrosion and scaling. Welded end disc made from the same material as the sheath provides a positive seal against moisture and other contaminants.

Grade “A” Nickel-Chrome resistance wire precisely wound on a high purity magnesium oxide core places the resistance wire as close to the inside of the sheath as possible. A high purity Magnesium Oxide (MgO) powder is used to fill all remaining space inside the sheath. Heater is then swaged, which compacts the magnesium oxide grains into a solid mass. The standard termination for is Type N, 10" (254 mm) long nickel conductor lead wires externally connected to solid conductor terminal pins.

Specifications:

Performance Ratings

Maximum Temperature: 1400°F (760°C)

Maximum Watt Density: 100-300 W/in2 (15.5-46.5 W/cm2); Depending on heater size and operating temperature.

Note: The maximum operating temperature and the life expectancy of a cartridge heater is dependent on two main factors.

  1. The maximum recommended sheath temperature (* 1200°F for a standard heater).
  2. The maximum ambient temperature for the termination selected.  Call us (844) 862-7880 if you require a recommendation for your application.

Electrical Ratings

Nominal Diameter 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"
Maximum Voltage 240 240 240 240 480* 480* 480*
Maximum Amperage (see next line for exceptions) 4.4 4.5 6.7 10.5 23 23 23
†Maximum Amperage for Types C1C, C1D, C2C, C2D, CS, F, M3, R1B, S1, S2, SA, W & W3 Terminations 3 3 5.5 7.6 9.7 9.7 9.7
Minimum Wattage at 120V on a 1" long Heater 50 45 45 50 50
Minimum Wattage at 120V on a 2" long Heater 20 20 20 20 20 20 20
Maximum Wattage at 120V 525 540 800 1260 2760 2760 2760
Maximum Wattage at 240V 1050 1080 1600 2520 5520 5520 5520
Maximum Wattage at 480V 11,000 11,000 11,000
Wattage Tolerance Plus 5%, Minus 10%
Resistance Tolerance Plus 10%, Minus 5%

Dimensional Specifications

Nominal Diameter 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1"
  in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm)
Actual Diameter 0.246 -6.25 0.308 -7.82 0.371 -9.42 0.496 -12.6 0.621 -15.77 0.746 -18.95 0.996 -25.3
Diameter Tolerance ±.002 -0.051 ±.002 -0.051 ±.002 -0.051 ±.002 -0.051 ±.002 -0.051 ±.003 -0.076 ±.003 -0.076
Minimum Length 1 -25.4 1 -25.4 1 -25.4 1 -25.4 1 -25.4 1/1/04 -31.75 1/3/04 -44.45
Maximum Length 36 -914 36 -914 48 -1219 60 -1524 72 -1829 72 -1829 72 -1829
Length Tolerance ±3/32 (2.4) ±3/32 (2.4) ±3/32 (2.4) ±3/32 (2.4) ±3/32 (2.4) ±1/8 (3.2) ±1/8 (3.2)
Heaters up to 5" (127 mm)
±2% of Sheath Length Heaters over 5" (127 mm)
Camber Tolerance Heaters up to 12" (305 mm) long 0.010"(.254 mm) per foot of length
Camber Tolerance Heaters over 12" (305 mm) long 0.020"(.508 mm) per foot of length

 

Length Tolerance

Lead Wires
– Wire Braid Leads
– Armor Cable Leads

  • Up to 36": -1/2", +1" (-12.7 mm, +25.4 mm)
  • 36" to 72": -1", +2" (25.4 mm, +50.8 mm)
  • Above 72": ±4" (101.6 mm)

Note: Specifications detailed on this page are standard. Contact us (844) 862-7880 if your application requires tighter tolerances or has other special requirements.

Temperature Coefficient of Resistance

The electrical resistance (ohms) of the heater resistance wire increases with temperature rise.  Tempco standard Hi-Density Cartridge Heaters are manufactured with ohms (cold ohms) 3.3% lower than the actual calculated ohms (hot ohms) to compensate for this increase.

Available Electrical Features

Diameter Dual Volts 3-Phase Dual  Circuits Multiple Heat Zones
(maximum 3 zones)
1/4" No No No No
5/16" No No No No
3/8" Yes* No No Yes*
1/2" Yes* Yes Yes Yes*
5/8" Yes Yes Yes Yes
3/4" Yes Yes Yes Yes
1" Yes Yes Yes Yes

 

Contact us (844) 862-7880 for maximum wattages and voltages.  * Heaters may require a larger diameter transition area at lead end.

Design Features:

  • See reference pages 2-2, 2-8, and 2-9 for Cartridge Heater Standard and Custom Features and Ordering information.
  • See reference page 2-3 for Hi-Density Cartridge Heater category classification (Multi-Purpose Use - Highly Engineered Specific Purpose Usage) and ordering information.
  • See reference page 2-4 for detailed performance and electrical specification information.
  • See reference page 2-5 for detailed Watt Density specifications.
  • See reference page 2-6 for heater fitting and preventative contamination measures.
  • See reference page 2-6 for heater temperature control methods and excessive lead flexing preventative measures.
  • See reference page 2-7 for preventing excessive operating temperatures, and BNS Anti-Seize preventative measures.
  • See reference pages 2-14 thru 2-23 for cartridge heater ordering information. 

Terminator Program

A select amount of heater specifications are available in our expedited shipping Terminator Program. Choose your desired shipping window and browse available selections below.

 

These heaters are semi-finished (substrates), offering you the option to finish them by choosing from 19 program-qualified lead end terminations and options on select cartridge heater diameters. Cartridge heaters will be ready for shipment within 1 to 3 days, depending on the termination/option selected.

Ordering Information — Follow These Simple Steps

1. Select a diameter available in the Terminator Program or refer to the Preconfigured Cartridge Heater Part Numbers:

  • 1/4"
  • 5/16"
  • 3/8"
  • 1/2"
  • 5/8"
  • 3/4"

2. Chose a Program qualified Electrical Termination (required), Termination Option (optional) and Power Variation (optional).

3. Specify your lead requirements in the event that the standard supplied lengths for Plain Leads (10"), Braid or Armor Cable (10" over 12" leads) are not suited for your application.

4. Submit your order to us to place an order, or contact us at (844) 862-7880!

Termination Location

Single-Ended Straight Termination

 /Tempco/Data-Assets/02-Cartridge-Images/WebC091.jpg

The Electrical Termination is located at one end of the heater and exits straight out from the heater.

Single-Ended Right-Angle Termination

 /Tempco/Data-Assets/02-Cartridge-Images/WebC007.jpg

The Electrical Termination is located at one end of the heater and exits at a right angle from the heater.

Double-Ended Termination

 /Tempco/Data-Assets/02-Cartridge-Images/WebC017.jpg

Each end has one Electrical Termination.

Note: Not Available on 1/8" Cartridge Heaters.

Request Other Termination Location

If your filter selections do not return your desired results from our standard configurations, please continue to select your Specifications.

When you are finished, save your selections in the Wish List (using the button at the right of this page) and follow the steps to submit them to Industrial Heat Sources!

Electrical Terminations

Type N: External Pins with Leads

 /Tempco/Data-Assets/02-Cartridge-Images/WebC091.jpg

Standard Termination for Hi-Density and Hi-Density Metric Cartridge Heaters.

Flexible stranded lead wires have fiberglass insulation and are connected to 1-1/4" (32 mm) long solid conductors. Silicone rubber coated fiberglass sleeving insulates the pin/lead wire connection.

  • Nominal 3/8" unheated section at the lead end is required.
  • Standard lead wire temperature rating: 482°F (250°C)
  • Standard 10" (254 mm) leads. Specify longer leads.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference pages 2-12 and 2-39 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  

Type F: Internally Connected Flexible Leads

/Tempco/Data-Assets/02-Cartridge-Images/WebC002.jpg 

Standard Termination for Low-Density Cartridge Heaters.

The fiberglass lead wires are internally connected to the terminal pins. This lead termination provides flexibility, permitting the lead wires to be sharply bent as they exit the heater.

  • Minimum 3/8" up to 1" unheated section at the lead end is required.
  • Standard lead wire temperature rating for HDC & HDM: 842°F (450°C).
  • Standard lead wire temperature rating for LDC: 482°F (250°C).
  • Standard 10" (254 mm) leads. Specify longer leads.
  • For HDC & HDM heaters, leads longer than 60" require a splice.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference page 2-39 for additional lead termination specifications and information.
  • See reference page 2-22 for specific Cartridge Heater Ordering Information.  

Type M1: Polyolefin Liquid Barrier

 

A liquid barrier used for low temperature applications primarily in refrigeration or food service applications. The seal bonds to both the heater and the leads.

  • Minimum 1" unheated section at the lead end is required.
  • Three conductor SJO type cord.
  • Available only in certain diameters. Heaters smaller than 1/2" diameter require an adapter.
  • Standard 10" (254 mm) leads. Specify longer leads.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference page 2-40 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  

Type M2: Potted End Seal

 /Tempco/Data-Assets/02-Cartridge-Images/WebC092.jpg

Potted end seals help to protect the heater from moisture or contamination from plastic material, cleaning solvents, or oils. The bottom end disc seal is welded in.

  • M2A: Cement potting with silicone varnish. Fiberglass lead wires externally connected.
  • Cement potting temperature rating: 1000°F (538°C)
  • Standard lead wire temperature rating: 482°F (250°C)
  • M2B: Silicone rubber potting. Silicone rubber lead wires internally connected.
  • Silicone rubber potting temperature rating: 450°F (232°C)
  • Standard lead wire temperature rating: 392°F (200°C)
  • M2C: High temperature epoxy potting. Teflon® lead wires internally connected.
  • High temp. epoxy potting temp. rating: 450°F (232°C)
  • Standard lead wire temperature rating: 392°F (200°C)
  • M2D: Low temperature epoxy potting. Teflon® lead wires internally connected.
  • Low temp. epoxy potting temp. rating: 266°F (130°C), UL rated to 194°F (90°C)
  • Standard lead wire temperature rating: 392°F (200°C)
  • M2E: Cement potting with silicone varnish. Fiberglass lead wires internally connected.
  • Cement potting temperature rating: 1000°F (548°C)
  • Standard lead wire temperature rating: 482°F (250°C)
  • Minimum of 3/8" up to 1" unheated section at the lead end is required.
  • Standard 10" (254 mm) leads. Specify longer leads.

NOTE: M2A and M2E are available through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping

  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference pages 2-13 and 2-40 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  

Type M3: Teflon® End Plug Seal

 /Tempco/Data-Assets/02-Cartridge-Images/WebC004.jpg

Standard Termination for Hi-Density Miniature Cartridge Heaters.

A moisture resistant Teflon® seal that is swaged in during the manufacturing process with Teflon® insulated lead wire.

  • Minimum 3/8" up to 1" unheated section at the lead end is required for most heater sizes.
  • Teflon® seal Temperature rating: 392°F (200°C)
  • Standard lead wire Temperature rating: 392°F (200°C)
  • Standard 10" (254 mm) leads. Specify longer leads. Leads longer than 60" require a splice.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference page 2-40 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  

Type SA: Sealed Corrugated Armor Cable

/Tempco/Data-Assets/02-Cartridge-Images/WebC076.jpg 

A liquid-proof stainless steel corrugated metal hose is silver brazed to the end of the cartridge heater. The end disc of the heater is also welded or brazed. This termination provides a positive seal against moisture and contamination entering the heater.

  • Minimum 3/8" up to 1" unheated section at the lead end is required.
  • Standard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)
  • Standard fiberglass lead wire temperature rating for LDC: 482°F (250°C)
  • Standard 10" (254 mm) cable over 12" (305 mm) leads. Specify longer leads or cable.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference page 2-41 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  

Type S1: Flexible Spring

 /Tempco/Data-Assets/02-Cartridge-Images/WebC005.jpg
  Type S1 Fig. 1 Type S1 Fig 2

The leads are reinforced with a steel spring for applications with extreme flexing. The spring is mechanically fastened or silver brazed.

  • S1A Mechanically fastened spring. S1B Silver brazed spring.
  • Minimum 3/8" up to 1" unheated section at the lead end is required.
  • Standard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)
  • Standard fiberglass lead wire temperature rating for LDC: 482°F (250°C)
  • Standard 10" (254 mm) leads. Specify longer leads.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference page 2-41 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  
Dimensions for Type S1
  Diameter   “A” Dim. “B” Dim.
  in mm Fig. in mm in mm
Hi-Density Cartridge Heaters 1/4  6.35 1 11/16 17.46 5/16  7.94
5/16  7.94 1 11/16 17.46 7/16 11.11
3/8  9.53 1 11/16 17.46 7/16 11.11
1/2 12.70 1 13/16 20.64 9/16 14.29
5/8 15.88 1 1 25.40 3/4 19.05
3/4 19.05 1 1-1/4 31.75 7/8 22.23
1 25.40 2 5/8 15.88 5/8 15.88
Low-Density Cartridge Heaters 3/16  4.76
1/4  6.35 1 11/16 17.46 5/16  7.94
3/8  9.53 1 11/16 17.46 7/16 11.11
1/2 12.70 1 13/16 20.64 9/16 14.29
5/8 15.88 2 7/16 11.11 9/16 14.29
3/4 19.05 2 1/2 12.70 9/16 14.29
7/8 22.23 2 5/8 15.88 9/16 14.29
1 25.40 2 5/8 15.88 5/8 15.88
1-1/4 31.75 2 5/8 15.88 5/8 15.88

Type W: Wire Braided Leads

 Type W Fig. 1

Stainless steel braid over fiberglass leads offers sharp bending not possible with armor cable, as well as abrasion protection.

  • Minimum 3/8" up to 1" unheated section at the lead end is required.
  • Standard lead wire temperature rating for standard HDC and HDM: 842°F (450°C)
  • Standard fiberglass lead wire temperature rating for LDC: 482°F (250°C)
  • Standard 10" (254 mm) braid over 12" (305 mm) leads. Specify longer braid/leads
  • Available through the Hi-Density Cartridge Heater Terminator Program for 2nd or 3rd Day Shipping
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference pages 2-13 and 2-42 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  

Dimensions for Type W
Diameter   “A” Dim./HD “A” Dim./LD
in mm Fig. in mm in mm
3/16  4.76 1 * * 1/4  6.35
1/4  6.35 1 5/16  7.94 5/16  7.94
5/16  7.94 1 3/8  9.53
3/8  9.53 2 3/8  9.53 3/8  9.53
1/2 12.70 2 7/16 11.11 7/16 11.11
5/8 15.88 2 9/16 14.29 9/16 14.29
3/4 19.05 2 9/16 14.29 9/16 14.29
7/8 22.23 2 9/16 14.29
1 25.40 2 9/16 14.29 9/16 14.29
1-1/4 31.75 2 9/16 14.29

 

* For Type W Miniature Cartridge Heater dimensions Call us at (844) 862-7880.

Type W3: Swaged-In Wire Braided Leads

 /Tempco/Data-Assets/02-Cartridge-Images/WebC013.jpg

Stainless steel braid over fiberglass leads offers sharp bending not possible with armor cable, as well as abrasion protection. In addition, Type W3 offers contamination resistance due to the Teflon® seal required for holding the wire braid.

  • Minimum 3/8" up to 1" unheated section at the lead end is required.
  • Teflon® Seal temperature rating: 392°F (200°C)
  • Standard lead wire temperature rating: 842°F (450°C)
  • Standard 10" (254 mm) braid over 12" (305 mm) leads. Specify longer braid/leads.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference page 2-42 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  

Type CS: Straight Armor Cable Directly Attached to Sheath

 /Tempco/Data-Assets/02-Cartridge-Images/WebC012.jpg

The armor cable is directly attached to the cartridge heater, eliminating the coupling, to maintain an overall diameter equal to or smaller than the cartridge diameter.

  • Minimum 3/8" up to 1" unheated section at the lead end is required.
  • Heaters with an OD of 3/4" or larger require reducing diameter washer.
  • Standard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)
  • Standard fiberglass lead wire temperature rating for LDC: 482°F (250°C)
  • Standard 10" (254 mm) cable over 12" (305 mm) leads. Specify longer leads or cable.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference page 2-43 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  

Type C1: Straight Armor Cable with Coupling

Type C1 Fig. 1Type C1 Fig. 2

Armor cable provides the maximum in protection for abrasive, jagged environments. The coupling between the cartridge and the armor cable is mechanically fastened or silver brazed.

* Limited to C1B: SS Cable, Mechanically Fastened for 1/8" Miniature Cartridge Heaters

  • C1A: Galvanized armor cable, mechanically fastened
  • C1B: Stainless steel armor cable, mechanically fastened
  • Standard lead wire temperature rating: 482°F (250°C)
  • C1C: Galvanized armor cable, silver brazed
  • C1D: Stainless steel armor cable, silver brazed
  • Standard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)
  • Standard fiberglass lead wire temperature rating for LDC: 482°F (250°C)
  • Minimum 3/8" up to 1" unheated section at the lead end is required.
  • Standard 10" (254 mm) cable over 12" (305 mm) leads. Specify longer leads or cable.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference pages 2-12 and 2-43 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  
Diameter   “A” Dim. “B” Dim. Cable
  in mm Fig. in mm in mm Dia.
Hi-Density Cartridge Heaters 1/4  6.35 1 11/16 17.46 5/16  7.94 1/4
5/16  7.94 1 11/16 17.46 7/16 11.11 1/4
3/8  9.53 1 11/16 17.46 7/16 11.11 3/8
1/2 12.70 1 13/16 20.64 9/16 14.29 1/2
5/8 15.88 1 1 25.40 3/4 19.05 1/2
3/4 19.05 1 1-1/4 31.75 7/8 22.23 1/2
1 25.40 2 5/8 15.88 5/8 15.88 1/2
Low-Density Cartridge Heaters 3/16  4.76
1/4  6.35 1 11/16 17.46 5/16  7.94 1/4
3/8  9.53 1 11/16 17.46 7/16 11.11 3/8
1/2 12.70 1 13/16 20.64 9/16 14.29 1/2
5/8 15.88 2 7/16 11.11 9/16 14.29 1/2
3/4 19.05 2 1/2 12.70 9/16 14.29 1/2
7/8 22.23 2 5/8 15.88 9/16 14.29 1/2
1 25.40 2 5/8 15.88 5/8 15.88 1/2­


Type R1: Right-Angle Leads with Copper Elbow

Type R1 Fig. 1Type R1 Fig. 2

This termination is used when space is limited. The copper elbow is mechanically fastened or silver brazed.

  • R1A: Mechanically fastened
  • R1B: Silver brazed
  • Minimum 3/8" up to 1" unheated section at the lead end is required.
  • Standard fiberglass lead wire temperature rating for HDC and HDM: 842°F (450°C)
  • Standard fiberglass lead wire temperature rating for LDC: 482°F (250°C)
  • Standard 10" (254 mm) leads. Specify longer leads.
  • R1A is available through the Hi-Density Cartridge Heater Terminator Program for Same or Next Day Shipping.
  • See reference pages 2-2 thru 2-9 for Standard and Custom Features, as well as Ordering Information.
  • See reference pages 2-12 and 2-44 for additional lead termination specifications and information.
  • See reference pages 2-14 thru 2-23 for specific Cartridge Heater Ordering Information.  
Diameter   “A” Dim. “B” Dim.
  in mm Fig. in mm in mm
Hi-Density Cartridge Heaters 1/4  6.35 1 3/4 19.05 3/4 19.05
5/16  7.94 1 15/16 23.81 15/16 23.81
3/8  9.53 1 15/16 23.81 15/16 23.81
1/2 12.70 1 1-1/4 31.75 1-1/4 31.75
5/8 15.88 1 1-1/4 31.75 1-1/4 31.75
3/4 19.05 1 1-3/4 44.75 1-1/4 31.75
1 25.40 2 1-1/8 28.58 1-3/8 34.93
Low-Density Cartridge Heaters 3/16  4.76
1/4  6.35 1 3/4 19.05 3/4 19.05
3/8  9.53 1 15/16 23.81 15/16 23.81
1/2 12.70 1 1-1/4 31.75 1-1/4 31.75
5/8 15.88 2 11/16 17.46 1-1/4 31.75
3/4 19.05 2 3/4 19.05 1-1/4 31.75
7/8 22.23 2 3/4 19.05 1-3/8 34.93
15/16 23.81 2 1-1/8 28.58 1-3/8 34.93­
1 25.40 2 1-1/8 28.58 1-3/8 34.93
1-1/4 31.75 2 1-1/8 28.58 1-3/8 34.93


Type R2: Right-Angle Leads

 

This termination is used when space is limited. Not suitable for abrasive environments. Same as C3 and W1 except plain leads. Various lead end finishes are available as listed below:

  • R2A: Cement potting, no lead end disc
  • Cement potting temperature rating: 1000°F (538°C)
  • Standard fiberglass lead wire temperature rating: 482°F (250°C)
  • R2B: Cement potting, welded lead end disc
  • Cement potting temperature rating: 1000°F (538°C)
  • Standard fiberglass lead wire temperature rating: 482°F (250°C)
  • R2C: Silicone rubber potting, welded lead end disc
  • Silicone Rubber potting temperature rating: 450°F (232°C)
  • Standard silicone rubber lead wire temperature rating: 392°F (200°C)
  • R2D: High temperature epoxy potting, welded lead end disc
  • High Temperature epoxy potting temperature ra